User manual PHILIPS 56332-30-16

[. . . ] 2 Disposal of product and packing material. . . . 3 Setting up the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Operating the monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] This data is subject to change without notice. Go to www. philips. com/support to download the latest version of leaflet. 20 4. Technical Specifications 4. 1 Resolution & Preset Modes Maximum Resolution For 197E3L 1366 x 768 at 60 Hz (analog input) 1366 x 768 at 60 Hz (digital input) Recommended Resolution For 197E3L 1366 x 768 at 60 Hz (digital input) H. freq (kHz) 31. 47 31. 47 37. 50 37. 88 46. 88 48. 36 60. 02 63. 89 79. 98 47. 71 Resolution 720x400 640x480 640x480 800x600 800x600 1024x768 1024x768 1280x1024 1280x1024 1366x768 V. freq (Hz) 70. 09 59. 94 75. 00 60. 32 75. 00 60. 00 75. 03 60. 02 75. 03 59. 79 Note Please notice that your display works best at native resolution of 1366 X 768@60Hz. For best display quality, please follow this resolution recommendation. 21 5. Power Management 5. 1 Automatic PowerSaving If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: 197E3L Power Management Definition VESA Mode Active Sleep (Standby) Switch Off Video ON OFF OFF H-sync V-sync Yes No Yes No Power Used < 12. 91 W (typ. ) < 0. 5 W < 0. 5 W LED color White White (blink) OFF The following setup is used to measure power consumption on this monitor. Native resolution: 1366 x 768 Contrast: 50% Brightness: 250 nits Color temperature: 6500k with full white pattern Note This data is subject to change without notice. 22 6. Regulatory Information Lead-free Product Lead free display promotes environmentally sound recovery and disposal of waste from electrical and electronic equipment. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer device. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive moisture. [. . . ] Q8: Can I change the color setting of my monitor?Ans. : Yes, you can change your color setting through OSD control as the following procedures, · Press "OK" to show the OSD (On Screen Display) menu · Press "Down Arrow" to select the option "Color" then press "OK" to enter color setting, there are three settings as below. Color Temperature; The 2 settings are 6500K, and 9300K. sRGB; this is a standard setting for ensuring correct exchange of colors between different device (e. g. [. . . ]