User manual PHILIPS 57927-31-16

[. . . ] Do not use liquid cleaners or aerosol cleaners. 4 Telephones should not be used while you are in a bathtub, shower or pool. Immersion of the telephone or handset in water could cause an electrical shock. 5 Slots and openings in the cabinet back or bottom are provided for ventilation, to protect it from overheating. These openings must not be blocked or covered. [. . . ] To answer the second call, press t. 8. 9. 1 Access the Call log 1 Press u in idle mode, and then scroll n to browse the call log. · The calls (missed and received) are displayed in chronological order with the most recent call at the top of the list. If the call is unviewed and unanswered, New appears on the display. After you view the message, New disappears. · Press t to dial out the number of the selected call log entry. 2 To view the call details, press o Menu and then press o Select. Use more of your phone 35 The display shows the caller information. · Press c Back at any time to return to the previous menu. To choose the format for call log display You must choose the correct format to dial the area code and number of the call log record chosen. The original incoming number from the call log will appear as a 7, 10 or 11-digit number. If it is a long distance call, the prefix digit 1 will automatically appear in front of the 10digit local calls. 1 When viewing the call log, press * to change the format of the call log display as it should be dialed from your location. For example, if the call log entry appears as "234-5678900": · Press * once to display "1-234567-8900" · Press * twice to display "5678900" · Press * 3 times to display "1567-8900" · Press * 4 times to display "234-567-8900" again. · The display shows the numbers of the handsets registered to the base. Use more of your phone 37 2 Scroll n to the handset number you wish to transfer your external call to and press o Select. 3 Press t on the called handset to answer the internal call, where both internal callers can talk. 4 Press h on the first handset to transfer the external call to the called handset. · The external call is transferred. Note If there is no answer from the called handset, press i to resume the external call. 1 2 3 4 8. 10. 3 Answer an external call during intercom 1 During intercom, a new call tone is emitted when there is an incoming external call. Press t to pick up the external call. During the call, press i to put the external call on hold (the caller can no longer hear you). · The display shows the numbers of the handsets registered to the base. Scroll n to the number of the handset you wish to establish the conference call with and press o Select. Press t on the called handset to answer the internal call, where both internal callers can talk. or long press i on the first handset to start the three-party conference. · Conference will be displayed on the screen once the conference call is established. 2 3 8. 10. 4 Switch between an internal and external call During the call, press i to switch between an internal or external call. 8. 10. 5 Establish a three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). [. . . ] · Move closer to the base station. · Wrong line cable used: Use the line cable provided. · Line adaptor is required: Connect the line adaptor to the line cord. · Move closer to the base station. [. . . ]