User manual PHILIPS 58014-48-16

[. . . ] 3 Press the release button (1) and pull the shaving unit in a straight upward movement off the shaver (2). 10) 4 Rinse the inside of the shaving unit under a hot tap for some time (Fig. 5 Rinse the hair chamber under a hot tap for some time (Fig. Every two months: shaving heads Note: Do not use cleaning agents or alcohol to clean the shaving heads. [. . . ] 1 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. 2 Press the release button and pull the shaving unit off the shaver (Fig. 4 Remove the shaving heads from the shaving unit one by one (Fig. Note: Do not clean more than one cutter and guard at a time, since they are all matching sets. If you accidentally mix up the cutters and guards, it may take several weeks before optimal shaving performance is restored. 9 Put the retaining frame back into the shaving unit and turn the orange wheel clockwise. 10 Put the shaving unit back onto the shaver. Storage Put the protection cap on the shaver after use to prevent damage to the shaving heads (Fig. Problem The shaver does not go on when I press the on/ off button. Your skin needs time to get used to the Philips shaving system. Skin irritation during the first 2-3 weeks of use is normal. After every use: shaving unit and hair chamber 1 Switch off the shaver, remove the adapter from the wall socket and pull the appliance plug out of the shaver. 2 Rinse the outside of the shaving unit under a hot tap for some time (Fig. Note: Make sure that the lug of the protection cap covers the release button. Replacement Replace the shaving heads every two years for optimal shaving results. replace damaged or worn shaving heads with Philips HQ55 shaving heads. For instructions on how to remove the shaving heads, see section `Every two months: shaving heads' in chapter `Cleaning'. Environment Do not throw away the appliance with the normal household waste at the end of its life, but hand it in at an official collection point for recycling. By doing this, you help to preserve the environment (Fig. If you have trouble removing the battery, you can also take the appliance to a Philips service centre. The staff of this centre will remove the battery for you and will dispose of it in an environmentally safe way (Fig. Removing the rechargeable battery Only remove the rechargeable battery when it is completely empty. [. . . ] 1 Make sure the appliance is disconnected from the mains. 3 Undo the screw at the bottom of the shaver (Fig. Do not connect the shaver to the mains again after you have removed the battery. Guarantee & service If you need service or information or if you have a problem, please visit the Philips website at www. [. . . ]