User manual PHILIPS 64PH990599

[. . . ] Digital Projection Television 64PH9905 Instructions for use ATSC CERTIFIED TM DIGITAL TELEVISION Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. Congratulations on your purchase, and welcome to the "family!" Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You've selected one of the best-built, best-backed products available today. [. . . ] Press the "exit" button to clear the screen when completed. ON 1 channel + OFF volume + ok EXIT NEXT. . . 3 exit 3/3 Analog DTV STOP 2 3 SMART HELP Remember, AVL works for sound levels coming from either the Antenna/Cable input on the rear of the DPTV (RF audio) or the Auxiliary (AUX IN) audio inputs. 28 PRONTO REMOTE NTSC/ANALOG FEATURES PRONTO - ANALOG TV MODE T he Pronto remote contains three display screens of "Analog TV" related controls. Use the touchscreen controls to access and adjust NTSC features for Input selection and Menu feature adjustments. Note: For battery installation and other details on the initial use of the Pronto remote control also refer to the 64PH9905 Quick Use guide included with your DPTV. BEGIN alternate audio Primarily used for "alt audio" ATSC mode feature, this button can also be used to quickly select the NTSC Second Audio Program (SAP) feature (when available). status button Press to see the current channel number on the DPTV screen. Also press to clear the DPTV screen after control adjustments. power button Press to turn the DPTV ON and OFF. mute button Press to turn the sound OFF on the DPTV. Press again to return the sound to its previous level. mute channel scan buttons Press to scan up (+) or down (-) through any NTSC programmed channel numbers. channel DTV power alt audio + volume status freeze ext input volume buttons + Press to adjust the DPTV sound level up (+) and down (-). 1 Gently tap the Pronto touchscreen with your finger to display its control panel for use. Be sure "DTV" is selected for the current device tab item category. sleep ext input button Press to quickly select NTSC auxiliary input modes (AUX1/2/3), as well as cycle through the DPTV's other input option modes (Monitor VGA, EXT HD, etc. ). DTV analog format 1/3 Analog DTV analog format button Press to select one of the TV screen display format modes (i. e. Panoramic, 4:3, 16:9, etc. ). 2 Press the "Analog" command button (on the lower left of Pronto remote case) to ensure NTSC mode commands are sent from the remote. STOP Analog Command Button number buttons Press the number buttons to select DPTV channels. Press two number buttons to select single digit "major" channel numbers. For example: press "0" then "6" for channel 6. sleep button Press to set the DPTV to automatically turn itself OFF. (15 minutes to 2 hours ahead. ) 2/3 Analog DTV A/CH DTV A/CH button menu menu buttons SMART HELP Due to the amount of optional component and feature uses available with the Pronto's Device Reference and Learn Code lists, please also refer to the separate full-use Pronto Owner's Manual for complete details on its function and operations. Press Alternate Channel (A/CH) to select previously viewed channels. Enter the desired two channel numbers (from the Pronto remote's number buttons), and then press A/CH to toggle back and forth between the two channel selections. 3/3 ok exit Analog DTV Press the Menu (or ok) button to show on-screen controls. Press M v or w buttons to move up (or down), the M or to move left (or right) through the list of controls. exit button Press to clear the DPTV screen after control adjustments. Also press to see the current channel number on the DPTV screen. scroll arrows Press to move to the next (or previous) page of Pronto controls. The touchscreen will display the current control screen's page number, and the total number of pages available for the selected device (1/3; 2/3; etc. ) 29 AUDIO/VIDEO NTSC ANALOG CONNECTIONS AUX1/2 INPUTS T he Analog Audio/Video Input jacks are for direct NTSC picture and sound connections between the DPTV and auxiliary equipment (VCR, DVD Player, etc. ) that has Audio/Video Output jacks. To view the playback of a VCR tape by using the Analog AUX1 Audio/Video Input jacks: BEGIN PICTURE AND SOUND FROM PLAYBACK OF VCR TAPE REAR OF DPTV AUX 1 NTSC ANALOG AUDIO OUT AUDIO INPUT AUX 1 L TV ANT/CABLE R R AUX 2 L 12 ANALOG S-VIDEO AUX 1 AUX 2 VIDEO OUT VIDEO INPUT 1 Connect the VIDEO OUT jack from the VCR to the AUX 1 VIDEO IN jack on the DPTV. VIDEO IN (YELLOW) AUDIO IN (RED/WHITE) 2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the VCR to the AUX 1 AUDIO IN jacks on the DPTV. OUT OUT OUT AUDIO/VIDEO OUTPUT JACKS ON VCR mute ANTENNA VIDEO R AUDIO L IN IN IN 3 Press the "ext input" button on the Pronto (or the Source button on the DPTV's local keyboard) to select the AUX 1 Audio/Video Inputs on the rear of the DPTV. Turn the VCR ON and press PLAY to view the tape playback on the DPTV. STOP channel 4 DTV power alt audio + volume status freeze ext input + sleep 4 analog format 1/3 Analog DTV 3 VCR If you have a single (monaural) Audio Output VCR, "Y" connectors are available to complete your connection. Contact your dealer, or our Parts Information Center (1800-292-6066) to order any optional accessories. SMART HELP Remember, connections and use of the DPTV's AUX 2 Audio/Video Input jacks are the same as for the AUX 1 jacks (except "AUX 2" is selected as the Input Source in step 3). 30 AUDIO/VIDEO NTSC ANALOG CONNECTIONS F AUX 3 INPUTS or more convenient Direct playback connections use the DPTV's Front Audio/Video Input panel (located on the DPTV's right front side panel). These Inputs allow for quick and easy access, particularly for the playback of Camcorder tape recordings. BEGIN PICTURE AND SOUND FROM PLAYBACK OF CAMCORDER TAPE FRONT AUDIO/VIDEO JACKS AUX3 Inputs located on right front side panel of DPTV. AUX 3 NTSC AUX3 VIDEO IN (YELLOW) AUDIO IN (RED/WHITE) VIDEO IN 1 Connect the VIDEO OUT jack from the Camcorder to the AUX3 VIDEO IN jack on the DPTV. Connect the AUDIO OUT jacks R(ight) and L(eft) from the Camcorder to the AUX3 AUDIO IN jacks on the DPTV. Press the "ext input" button on the Pronto (or the Source button on the DPTV's local keyboard) to select the AUX3 Audio/Video Inputs on the DPTV. Turn the Camcorder ON and press PLAY to view the tape on the DPTV. STOP L UP CH SOURCE VOL ­ M + EXIT VOL AUDIO IN R CH DOWN 12 2 4 mute channel 3 DTV power alt audio + volume status freeze ext input + sleep analog format 1/3 Analog DTV 3 AUDIO/VIDEO OUTPUT JACKS ON CAMCORDER CAMCORDER If you have a single (monaural) Audio Output Camcorder, "Y" connectors are available to complete your connection. [. . . ] Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options. Aspect Ratio * The proportions of a rectangular display screen. NTSC television has a 4:3 ratio; HDTV is 16:9. Programming * The procedure of adding or deleting channel numbers into the DPTV's memory circuits. In this way the DPTV "remembers'' only the locally available or desired channel numbers and skips over any unwanted channel numbers. PSIP * Program and System Information Protocol. [. . . ]