User manual PHILIPS 64PP9901

[. . . ] Digital Projection Television 64PH9901 Instructions for use ATSC CERTIFIED TM DIGITAL TELEVISION Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. And take advantage of these important benefits. Warranty Verification Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your PHILIPS warranty. Owner Confirmation Your completed Warranty Registration Card serves as verification of ownership in the event of product theft or loss. Model Registration Returning your Warranty Registration Card right away guarantees you'll receive all the information and special offers which you qualify for as the owner of your model. Congratulations on your purchase, and welcome to the "family!" Dear PHILIPS product owner: Thank you for your confidence in PHILIPS. You've selected one of the best-built, best-backed products available today. [. . . ] Enter the desired two channel numbers (from the Pronto remote's number buttons), and then press A/CH to toggle back and forth between the two channel selections. yellow setup green blue menu buttons menu TV Press the Menu (or M) button to show on-screen controls. Press M v or w buttons to move up (or down), the M or to move left (or right) through the list of controls. M exit button Press to clear the DPTV screen after control adjustments. Also press to see the current channel number on the DPTV screen. 4/4 exit Analog DTV scroll arrows Press to move to the next (or previous) page of Pronto controls. The touchscreen will display the current control screen's page number, and the total number of pages available for the selected device (1/4; 2/4; etc. ) 23 AUDIO/VIDEO NTSC ANALOG CONNECTIONS AUX1/2 INPUTS T he Analog Audio/Video Input jacks are for direct NTSC picture and sound connections between the DPTV and auxiliary equipment (VCR, DVD Player, etc. ) that has Audio/Video Output jacks. To view the playback of a VCR tape by using the Analog AUX1 Audio/Video Input jacks: BEGIN PICTURE AND SOUND FROM PLAYBACK OF VCR TAPE REAR OF DPTV AUX 1 NTSC ANALOG AUDIO OUT AUDIO INPUT AUX 1 L TV ANT/CABLE R R AUX 2 L 12 TV IR BLASTER ANALOG S-VIDEO AUX 1 AUX 2 VIDEO OUT VIDEO INPUT 1 Connect the VIDEO OUT jack from the VCR to the AUX 1 VIDEO IN jack on the DPTV. VIDEO IN (YELLOW) AUDIO IN (RED/WHITE) 2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the VCR to the AUX 1 AUDIO IN jacks on the DPTV. OUT OUT OUT AUDIO/VIDEO OUTPUT JACKS ON VCR mute ANTENNA VIDEO R AUDIO L IN IN IN 3 Press the "ext input" button on the Pronto (or the Source button on the DPTV's local keyboard) to select the AUX 1 Audio/Video Inputs on the rear of the DPTV. Turn the VCR ON and press PLAY to view the tape playback on the DPTV. STOP channel 4 TV power alt audio + volume status dtv freeze ext input + sleep analog TV 4 DTV 1/4 Analog DTV 3 VCR If you have a single (monaural) Audio Output VCR, "Y" connectors are available to complete your connection. Contact your dealer, or our Parts Information Center (1800-292-6066) to order any optional accessories. SMART HELP Remember, connections and use of the DPTV's AUX 2 Audio/Video Input jacks are the same as for the AUX 1 jacks (except "AUX 2" is selected as the Input Source in step 3). 24 AUDIO/VIDEO NTSC ANALOG CONNECTIONS F AUX 3 INPUTS or more convenient Direct playback connections the DPTV's Front Audio/Video Input panel can be used. Located on the DPTV's right front side panel these Input jacks allow for quick and easy connections, particularly for the playback of Camcorder tape recordings. To view the playback of a Camcorder recording using the AUX3 Analog Audio/Video Input jacks: BEGIN PICTURE AND SOUND FROM PLAYBACK OF CAMCORDER TAPE AUX 3 NTSC FRONT AUDIO/VIDEO JACKS AUX3 Inputs located on right front side panel of DPTV. AUX3 UP CH VIDEO IN + EXIT VOL SOURCE VOL ­ M CH DOWN L 1 Connect the VIDEO OUT jack from the Camcorder to the AUX3 VIDEO IN jack on the DPTV. Connect the AUDIO OUT jacks R(ight) and L(eft) from the Camcorder to the AUX3 AUDIO IN jacks on the DPTV. power AUDIO IN R 12 2 mute channel AUDIO IN (RED/WHITE) VIDEO IN (YELLOW) 4 TV status + volume 3 Press the "ext input" button on the Pronto (or the Source button on the DPTV's local keyboard) to select the AUX3 Audio/Video Inputs on the right side of the DPTV. Turn the Camcorder ON and press PLAY to view the tape on the DPTV. STOP alt audio dtv freeze ext input + sleep analog TV DTV 1/4 Analog DTV 3 AUDIO/VIDEO OUTPUT JACKS ON CAMCORDER CAMCORDER If you have a single (monaural) Audio Output Camcorder, "Y" connectors are available to complete your connection. Contact your dealer, or our Parts Information Center (1-800-292-6066) to order any optional accessories. 4 25 AUDIO/VIDEO NTSC ANALOG CONNECTIONS AUX1 - S-VIDEO INPUTS T he S(uper)-Video connections on the rear of the DPTV offer improved picture detail and clarity for the playback of S-VHS VCR tapes or DVDs over a standard composite video input connection. Note: The VCR (or DVD Player) must have a S-VIDEO OUT(put) jack in order for you to complete the connections shown on this page. BEGIN PICTURE AND SOUND FROM PLAYBACK OF SVHS VCR TAPE PLAYBACK REAR OF DPTV S VIDEO NTSC ANALOG 2 AUX 2 L R ANALOG 1 S-VIDEO AUDIO OUT AUDIO INPUT AUX 1 L TV ANT/CABLE R TV IR BLASTER AUX 1 AUX 2 VIDEO OUT VIDEO INPUT 1 Connect the S-VIDEO (SVHS) OUT jack from the VCR to the AUX1 S-VIDEO input plug on the DPTV. The S-VIDEO connecting cable will be supplied with the S-VHS VCR (or DVD Player). S-VIDEO CABLE S-VIDEO OUT AUDIO OUT (RED/WHITE) OUT OUT OUT OUT S-VIDEO ANTENNA VIDEO R AUDIO L IN IN IN 2 Connect the AUDIO OUT jacks R(ight) and L(eft) from the S-VIDEO VCR to the AUX1 AUDIO input jacks on the DPTV. Press the "ext input" button on the Pronto (or the Source button on the DPTV's local keyboard) to select the S VIDEO input on the DPTV. Note: The "S VIDEO" picture source option appears only when a S-VIDEO cable has been connected to the DPTV. mute channel TV power alt audio + volume 4 status dtv freeze ext input + sleep 3 analog TV DTV 1/4 Analog DTV 3 S-VHS VCR 4 Turn the VCR ON and place it in the S-VIDEO (or S-VHS) playback mode. Insert S-VHS cassette tape and playback in a normal manner. STOP NOTE: A CD-i (Compact Disc Interactive) player, Video Game, or other S-VIDEO accessory can be hooked up to the DPTV using this type of connection. Please be aware that such video sources, which show a constant non-moving pattern on the DPTV screen, can cause picture tube damage. When not in use turn your video accessories OFF. Also, regularly alternate the use of video sources with normal TV program viewing. SMART HELP Remember, connections and use of the DPTV's SVIDEO AUX2 Input plug is the same as for the S-VIDEO AUX1 input (except "S-VIDEO 2" is selected as the Picture Source in step 3). 26 AUDIO/VIDEO NTSC ANALOG CONNECTIONS AUDIO/VIDEO OUTPUTS T he Audio/Video Output jacks on the DPTV can be used to record TV programs on VCRs which have Audio/Video Input jacks. To record TV programs by using the Audio/Video Output jacks on the DPTV: BEGIN PICTURE AND SOUND BEING RECORDED ON VCR. REAR OF DPTV NTSC ANALOG AUDIO OUT AUDIO INPUT AUX 1 L TV ANT/CABLE R R AUX 2 L 12 TV IR BLASTER ANALOG S-VIDEO 1 Connect the VIDEO OUT jack from the DPTV to the VIDEO IN jack on the VCR. [. . . ] Designed for use with VCRs (or other accessories) in order to receive higher picture resolution and offer sound connection options. Aspect Ratio * The proportions of a rectangular display screen. NTSC television has a 4:3 ratio; HDTV is 16:9. Programming * The procedure of adding or deleting channel numbers into the DPTV's memory circuits. In this way the DPTV "remembers'' only the locally available or desired channel numbers and skips over any unwanted channel numbers. PSIP * Program and System Information Protocol. [. . . ]