User manual PHILIPS 69118-31-PH

[. . . ] thank you for buying the Philips IMAGEO AquaLight 3 set. Read these instructions carefully before using the AquaLights. [. . . ] Using the IMAGEO AquaLight for the first time Before using the IMAGEO AquaLight for the first time, charge them for at least 10 hours until the red indicator LED on charger base is off. connect the adapter (A) to the charger base (B) with the DC plug. Then plug the adapter (A) into a wall socket. The Ni-MH batteries in the AquaLight (C) are now being charged. After about 10 hours the batteries will be fully charged and the indicator LED will be switched off. Remove the adapter from the wall socket. For safety reasons, there is a built-in timer, which automatically terminates the charging cycle after 10 hours. To re-start the built-in timer and to start the charging cycle again, you push the button on the charging base (Press to charge) after which the red light will be on and the 10-hour charging cycle starts again. Under normal circumstances the batteries in the IMAGEO AquaLight can be charged approximately five hundred times without any loss of capacity. the capacity will then gradually start to decline. The batteries will reach the end of their useful life after being charged roughly a thousand times. Spare parts can be ordered from the Philips website: www. [. . . ] Din motive de siguran, exist un cronometru integrat care întrerupe ciclul de încrcare automat dup 10 ore. Se till att alltid följa lokala föreskrifter och utnyttja tillgängliga möjligheter till återvinning när du kasserar förpackningen, adaptern och laddaren. [. . . ]