User manual PHILIPS 69143-55-PH

[. . . ] Compatibility with timers You can use LivingColors with a timer (not included). When switched on with a timer, the LivingColors will show your last setting (static colour or automatic colour-changing mode) Cleaning and maintenance: Remove the plug from the wall socket. [. . . ] You can repeat this procedure up to 3 times, preferably from another position. If it was linked successfully, the lamp will give 1 green flash; if the linking was unsuccessful it will revert to its previous settings immediately without flashing green. Check if the lamps you cannot link both have a "G2" sign on the back of the remote control and at the bottom of the lamp itself. If one of the lamps does not have it, it cannot be linked with another lamp that does (but it can still be linked with other lamps that do not have the G2 sign). If the colour changes to another (static) colour, but no colour loop starts, then your sweep movement was not correct; please try again Contact the Philips Lighting Contact centre (see Warranty and Service) Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. Warranty: Philips' two-year warranty is valid if the product is used in accordance with the instructions and for its intended purpose. Claims will only be accepted on submission of the original proof of purchase (invoice, sales slip or receipt) stating the purchase date, the name of the dealer and a description of the product. The Philips warranty lapses if: - Anything has been changed, crossed out, deleted or rendered illegible on the purchase docket or product description. - Failures caused by damage , faulty connections or abuse. - A defect is caused by extreme circumstances not inherent to the LivingColors, for example, lightning, flooding, fire, incorrect use or negligence. - The LivingColors has been opened or disassembled. [. . . ] While in the automatic colour changing mode, you can also adjust the saturation and brightness of the colours. To switch back to static colour mode, sweep around the colour wheel again, then press "0". [. . . ]