User manual PHILIPS 69164-31-PH

[. . . ] If you keep pressing the saturation down button, you will ultimately reach white. Sweep your finger around the colour wheel (one full circle) and briefly press "I" ("On"); you will hear a beep, and LivingColors will switch to the automatic colour-changing mode: the lamp will start changing colours automatically. You can adjust the speed at which colours change. [. . . ] In order to control a lamp, you need to select it. You can do this using the light selection buttons. When selected, the lamp will flash and the light selection indicator on the remote control (light bulb) will light up. This means you can now adjust the selected lamp individually. When no lamp is selected (light selection indicator is off), all your adjustments will apply to all lamps connected to the remote control (for example, you can dim all lights in the room). O A lamp is not providing light o Check the connections of the cord to the lamp. check that the plug is correctly placed in the wall socket. O Remove the power cord and then put it back. If the lamp briefly turns on and then goes off, use the remote control to switch it back on. A lamp is not responding to the remote control o Link the remote to the lamp by following the procedure described in section 1 of this manual. o Check the batteries in the remote control. The batteries should be correctly loaded (+ and -) and should be charged. If the remote control is still not working, try replacing the batteries. O Make sure that the lamp you are trying to connect to the remote control has a SmartLink logo on the box. [. . . ] Cleaning and maintenance: To avoid scratching, the LivingColors remote control should only be cleaned with a soft dry cloth. Environment: If you discard the appliance in due course, dispose of it in accordance with the instructions of the local authority. remove the batteries when you discard the remote control. [. . . ]