User manual PHILIPS 6P5451C

[. . . ] Never place the product and accessories near naked flames or other heat sources, including direct sunlight. Never insert objects into the ventilation slots or other openings on the product. Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. [. . . ] Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Disconnect the product from the power outlet before lightning storms. When you disconnect the power cord, always pull the plug, never the cable. * Wireless and Ethernet LAN functions are authorized for indoor use only. Hereby, Philips Consumer Lifestyle, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the EC declaration of Conformity is available in the Portable Document Format (PDF) version of the user manual at www. philips. com/support. Risk of short circuit or fire!•• Before you connect the product to the power outlet, ensure that the power voltage matches the value printed on the back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. •• For best reception, make sure that the line-of-site between the wireless receiver and the home theater is not blocked by furniture, walls and other objects. Connect the wireless transmitter Connect the wireless transmitter to the Wireless Rear Audio connector on the back of the home theater. EN 5 6P5451C_00_UM_V1. 0. indb 5 2012/7/30 9:47:04 English 2 Connect Connect rear speakers to wireless receiver Note •• The rear speakers in the picture showed may vary. 3 Troubleshooting Follow these steps if: • there is no sound from the rear speakers, and • the indicator on the wireless receiver blinks continuously for more than one minute. REAR LEFT REAR RIGHT 1 2 ~AC MAINS Connect the home theater, wireless transmitter, and wireless receiver correctly (see 'Connect' on page 5). Insert a pin into the pairing pinhole at the back of the wireless receiver. »» The indicator on the wireless receiver blinks for thirty seconds. Complete the remaining steps within thirty seconds. Switch the home theater to either AUX source or MUSIC iLINK source. Press and hold the Navigation button (right) until PAIRING (PAIRING) blinks on the home theater display panel. »» 'PAIRED (PAIRED) is displayed. • If FAILED (FAILED) is displayed, repeat steps 1 to 4. REAR RIGHT REAR LEFT 3 4 Connect the rear left and rear right speakers to the matching connectors at the back of the wireless receiver. Connect power cord Warning •• Risk of product damage! [. . . ] Press and hold the Navigation button (right) until PAIRING (PAIRING) blinks on the home theater display panel. »» 'PAIRED (PAIRED) is displayed. • If FAILED (FAILED) is displayed, repeat steps 1 to 4. REAR RIGHT REAR LEFT 3 4 Connect the rear left and rear right speakers to the matching connectors at the back of the wireless receiver. Connect power cord Warning •• Risk of product damage! [. . . ]