User manual PHILIPS 7-PHOTO FRAME 7FF1CMI

[. . . ] What else you'll need Reproduction, copying, use, modification, hiring, renting, public performance, transmission and/or broadcasting in whole or in part is prohibited without written consent of Philips Electronics NV Philips digital Photo Frame can be placed either vertically or horizontally to fit the photos on display. Its internal rechargeable battery provides you the freedom to pass it around and show photos without the power cord. Or, you can place it somewhere in the room for constant Photo Frame by connecting it to the main. Place head of stand into socket · Connect the supplied power cable from Photo Frame to a power outlet . [. . . ] It will turn off and turn on automatically at preset time. Digital Photo Frame will automatically turn off its display exactly at the Auto-off time, If the time has already passed today, it will go into Auto-off status at that time tomorrow. Choose on-screen language Key (the 3rd key from the left on the rear of Photo Frame). Key to choose your preferred language and press Again to leave this menu. Taking care of your Photo Frame You may check the status of your Photo Frame-- whether the system is ON, if the battery is charging, how many more photos can be stored, how much battery power remains, which media are currently connected, or the Photo Frame software version. From the LED light indicator in the back, you can determine whether the system is ON or the battery is charging: Power LED Battery LED Green: System ON Off: System OFF Orange: Battery is charging Off: Battery is not charging Below is an easy way to look up other information. Key (the 3rd key from the left on the rear of Photo Frame). Free space (pic): XX (Estimates of how many additional photos can be stored in Photo Frame) Power: DC (when main is supplying power) XX% (estimates of battery power remaining, when internal battery is supplying power. Selecting brightness, language and set Taking care of your Photo Frame time functions · Checking 1) Do not drop Photo Frame Photo Frame is a complicated electronic device and cannot withstand shock from drops. status 2) Do not expose to moisture · Taking care of Photo Frame is neither moisture proof nor moisture resistant. Exposing it to moisture or your Photo liquid spills of any kind will very likely damage your Photo Frame. frame 3) Do not hit or scratch The LCD panel of Photo Frame is made of glass and therefore is sensitive to abnormal force or hardware with sharp edges. Please use only dry soft cloth to clean your screen. For first time use, please fully charge your Photo Frame (Battery LED will be off when battery is fully charged). This process may take up to 3 hours or more. Photo Frame starts fully recharging its internal battery only when the battery level is below certain value. This is designed to extend your Photo Frame battery life by reducing unnecessary battery charging. Make sure the stand of your Photo Frame is clear from cables as cables could pull the stand out of Photo Frame to the floor. Please use the keys in the back to control Digital Photo Frame. Q: Can I switch between different slideshows photos by using different memory cards?When you connect your memory card to Digital photo frame, it will slideshow photos stored on that specific card. Photo Frame will be > 85% charged in 2 hours when system is OFF and in 5 hours when system is ON. [. . . ] This product comply with RoHs and Philips BSD (AR17-G04-5010-010) requirements Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following standards - EN60950:2000 (Safety requirement of Information Technology Equipment) - EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment) - EN55024:1998 (Immunity requirement of Information Technology Equipment) - EN61000-3-2:2000 (Limits for Harmonic Current Emission) - EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable - 73/23/EEC (Low Voltage Directive) - 89/336/EEC (EMC Directive) - 93/68/EEC (Amendment of EMC and Low Voltage Directive) and is produced by a manufacturing organization on ISO9000 level. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ]