User manual PHILIPS 755

[. . . ] Discover your phone Back of the phone: camera lens How to. . . Switch phone On/Off Enter PIN code Press and hold ). Enter your PIN code using the keypad and press , or # to confirm. Enter the phone number on the keypad and press ( to dial. Press the navigation key + or - during the call. [. . . ] You save a message by activating the Auto save SMS option (see above), or by selecting a received message, pressing , twice and selecting Move to Archive. Settings Press , , select Messages > E-mail > E-mail 1 and press , . Then select Settings and press , to access the following options: Account name To rename E-mail 1 and E-mail 2 boxes. An e-mail account might be predefined and locked, preventing renaming. To configure the settings needed to connect to the e-mail server of your Internet Service Provider (ISP). In some cases, Login, Password and E-mail address are up to you when you subscribe to your account. The POP3 address is used to receive e-mails, whereas the SMTP address is used to send e-mails. E-Mail If not included in your phone subscription, you must subscribe to an e-mail account and have received the settings information from your provider. In this case, all parameters are communicated to you by your provider and/or operator as described below and must be entered as given. In some cases, your operator might also be your e-mail service provider. This menu allows you to send and receive e-mails, with or without E-mail attachements. If your phone was preconfigured, the parameters are already set and you don't have to change them, except for E-mail server WARNING !For an e-mail connection via GPRS, if your phone operator is NOT your e-mail provider, contact them to get the correct address of the SMTP server. Messages 39 Advanced This menu features advanced settings that you shouldn't have to change. If the fields of these menus are empty, or if you encounter connection problems, contact your ISP. menu should be Off in most European countries: your e-mails will NOT be sent if set to On. Contact your provider for complete information. GSM Settings To change the GSM settings: · Login & Password, · Phone number (ISDN or Analogic) needed to establish the connection and provided by your operator, · Auto disconnect, a value of over 30 seconds after which the phone disconnects automatically (if a connection was in progress). The lack of exchanges with the network defines the inactivity time period leading to auto disconnection. GPRS settings To change the GPRS settings (same fields as the GSM settings). The APN menu lets you enter the address of the external network you will connect to. Error messages during connections are mainly due to incorrect parameters: contact your operator if needed before first use, in order to have the correct settings. Network access To select the type of network used when launching a connection, and to configure the corresponding settings. Bearer · GSM or GPRS: your mobile will only use the GSM or the GPRS network for e-mail connections. · GPRS first: your mobile will first try to connect to the GPRS network, then to the GSM network if the GPRS network isn't available. Selecting this option you need to have both GSM and GPRS settings configured. 40 Messages Send mail This menu allows you to send e-mails to one or several recipients at a time, Send mail including with an attachment such as a jpeg picture. Once received, your messages can be forwarded and the attachments visualised with the appropriate software. [. . . ] Check local regulations. Precautions 75 Philips authentic accessories Some accessories, such as a standard battery and a charger, are included as standard in the package of your mobile phone. Other accessories might be sold in the commercial package (according to the operator or the retailer), or sold separately. As a consequence, the package contents may vary. To maximise the performance of your Philips phone and not to void the warranty, always purchase Philips Authentic Accessories that are specially designed for use with your phone. [. . . ]