User manual PHILIPS A3.610

[. . . ] Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. match wide blade of plug to wide slot , fully insert. A grounding type plug has two blades and a third grounding prong. [. . . ] As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: Connect the blue wire to the terminal marked N or coloured black. connect the brown wire to the terminal marked L or coloured red. Do not connect either wire to the earth terminal in the plug, marked E (or ) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires. 1-channel input source can be connected to this multi-channel speaker 11. Switch to the off position if the system will not be used for long periods to reduce power consumption. Choose from either the game, movie or music 8. To adjust the presence of the higher tones according to your personal preference To adjust the bass level according your personal preference 5 mm stereo jack to connect a stereo audio-visual source  MASTER VOLUME - / + To adjust the master volume higher or lower 3. For more information on cable and connection to different devices see www. Switch on (and switch off as well) the speaker system using the standby button on the remote control. Do not insert the power plug into the AC outlet until all the connections are made!Connect the front right satellite speaker to FRONT Connect the front left satellite speaker to FRONT Connect the fixed mains power code to the AC outlet. Do not expose the speakers to excessive heat (caused by heating equipment or direct sunlight). To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. If fluid spills into the speakers, disconnect any connections immediately and let the speakers dry before reusing them. You may clean the speakers with a soft, slightly dampened lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect. If the speakers do not operate, disconnect them from the power supply. Wait a few seconds before reconnecting them to the power supply. If your intentions are not to use the speaker system for a longer period of time - for example, youre going on a vacation - it is recommended to switch off the system completely and not to leave it in standby mode. The closer it is to the corner, the stronger the maximum bass output. The subwoofer is not magnetically shielded, so position it at least 0. [. . . ] You can find the best position for your speakers by experimenting. Sätt till läget av om anläggningen inte ska användas under en längre period, för att minska strömförbrukningen. För omkoppling av högtalarsystemet till läge mute (tyst), och tillbaka till normalläget För inställning av huvudvolymen, högre eller lägre Anslut 9-stiftskontakten (mini-DIN) till högtalaranläggningen och de 3 ministereokontakterna till ljudkortet. ansluta externa stereo-ljudkällor (kablar ingår ej) 2. [. . . ]