User manual PHILIPS ACT400-00C

[. . . ] to clean a disc, wipe it in a straight line from the center towards the edge using a soft, lint-free cloth. cleaning agents may damage the disc. environmental information all redundant packing material has been omitted. we have done our utmost to make the packaging easily separable into three mono materials: PET, PS, PE. your set consists of materials which can be recycled if disassembled by a specialized company. [. . . ] do not use old and new or different types of batteries in combination. indication of empty batteries replace the batteries or connect the mains adapter as soon as A blinks and Replace batteries is scrolled. remove batteries if they are empty or if the set will not be used for a long time. batteries contain chemical substances, so they should be disposed of properly. average playing time of batteries under normal conditions: alkaline batteries esp on esp and powersaving on: audio disc mp3-cd 15 hours 24 hours 10 hours Replace batte note: to switch on powersaving, press esp repeatedly during playback until ESP is shown (see "esp and powersaving"). 10 power supply / headphones mains adapter (supplied or optionally available) use only the AY 3170 mains adapter (4. 5 V/300 mA direct current, positive pole to the center pin). any other product may damage the set. 1 make sure the local voltage corresponds to the adapter´s voltage. if your mains adapter is equipped with a voltage selector, set this selector to the local mains voltage if necessary. 2 connect the mains adapter to DC on the set and to the wall socket. note: always disconnect the adapter if you are not using it. headphones (HJO20) connect the supplied headphones to p. note: p can also be used for connecting this psa to your hifi system. adjust the volume and sound on the psa and your hifi system. use your head when using headphones hearing safety do not play your headphones at a high volume. hearing experts advise that continuous use at high volume can permanently damage your hearing. traffic safety do not use headphones while driving a vehicle. it may create a hazard and it is illegal in many countries. even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you. 11 basic functions playing a disc with this set you can play all pre-recorded audio cds all finalized audio cdrs and cdrws mp3-cds (cd-roms with mp3 files) 1 2 push the slider to open the cd lid. insert a disc, printed side up, by pressing gently on the disc´s center so that it fits onto the hub. close the lid by pressing it down. 3 press 2; to start playback. the track type (CD or MP3), the current track number and the elapsed playing time are displayed. for an mp3 track, the album number is also displayed and the filename is scrolled twice. 4 press 9 to stop playback. the total number of tracks, the track types (CD, MP3), the number of albums on an mp3-cd and the total playing time (of an audio disc only) are displayed. 5 to remove the disc, hold it by its edge and press the hub gently while lifting the disc. notes: after pressing 2; it may take some time until the first mp3 track is played. 20 seconds after pressing 9 the set switches off automatically. stop [CDA] 15 12 basic functions pause 1 press 2; to interrupt playback. the time where playback was interrupted is blinking. 2 to resume playback press 2; again. 0:24 1 LOVE01 1 13 basic functions volume and sound volume adjustment adjust the volume by using - & +. bass adjustment 1 press eq once during playback to select the bass adjustment. the current bass setting blinks. 2 press 2 repeatedly to select either: No Bass: no bass enhancement Bass 1: moderate bass enhancement Bass 2: strong bass enhancement the selected bass setting blinks. 3 press eq to confirm your selection. treble adjustment 1 press eq twice during playback to select the treble adjustment. the current treble setting blinks. Bass 1 Bass 2 2 press 2 repeatedly to select either: No Treble: no treble enhancement Treble: treble enhancement the selected treble setting blinks. No Treble Treble 3 press eq to confirm your selection. 14 basic functions selecting and searching on all discs selecting a track during playback briefly press 5 or 6 once or several times to skip to the beginning of the current, previous or subsequent track. [. . . ] keep this set away from active mobile phones or strong magnetic fields. pls insert cd or no audio file indication insert a disc, label upwards. wait until the steamed up lens has cleared. make sure you have inserted an audio disc or an mp3-cd. unfinalized cd indication make sure the inserted cdr or cdrw is finalized. 23 troubleshooting problem music file is not played solution make sure that the file names of the mp3 files end with . mp3 missing directories on mp3-cd make sure the total number of files and albums on your mp3-cd does not exceed 350. only albums with mp3 files are shown. the disc skips tracks clean or replace the disc. [. . . ]