User manual PHILIPS ACT7582

[. . . ] 3 If necessary press 9 once or twice until the set is switched off. Note: It is normal for the batteries to become warm during recharging. Recharging already charged or half-charged batteries will shorten their lifetime. Therefore, after using the ECO-PLUS NiMH batteries a few times, discharge them completely before recharging. [. . . ] If you play a CD-Rewritable, it takes 5 ­25 seconds after pressing 2; until sound reproduction starts. Note: The display message nF dISC indicates that this CD has to be finalized (FINALIZE) with a CD recorder before you can play it on this CD player. Briefly press or § once or several times to skip to the current, previous or subsequent track start. Y Playback continues with the selected track and its number is displayed. Selecting a track when playback is stopped 1 Briefly press or § once or several times. Searching for a passage during playback 1 Keep or § depressed to find a particular passage in a backward or forward direction. Y Searching is started and playback continues at a low volume. 2 Release the button when you reach the desired passage. Y Normal playback continues from this position. You can select up to 99 tracks and store them in the memory in a desired sequence. 1 While playback is stopped, select a track with or §. Y PROGRAM lights up, the track number programmed and P with the total number of stored tracks are displayed. You can review the program by depressing PROG P for more than 2 seconds. Note: If you press PROG P and there is no track selected, SELECt is displayed. Y CLEAr is displayed once, PROGRAM goes off and the program is erased. Note: The program will also be erased if you ­ interrupt the power supply, or ­ open the CD lid. When restarting, playback continues from where you have stopped. Y RESUME is shown and playback continues from where you have stopped. Note: If you open the CD lid, the last position played will not be stored any longer. When a key is pressed, no action will be executed then. If the set is switched off, HoLd is displayed only by pressing 2;. 2 To deactivate HOLD , switch the slider to OFF. [. . . ] This warranty extends only to defects occurring under normal use of the product when operated in accordance with the instructions. Home service within the normal service area of our Philips Authorised Service Centres will be provided for television receivers with screen size 48 cm and above. All other products are to be brought or sent to your nearest Philips Authorised Service Centre. This warranty does not cover: a) Mileage or travelling time, pickup or delivery, cost of insurance. [. . . ]