User manual PHILIPS AD712

[. . . ] · Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. · Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the unit. [. . . ] When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Warning · To reduce the risk of fire or electric shock, do not expose this device to rain or moisture. Connect the power adapter to: · the DC IN socket at the back of the device. · the power socket. Tip · The type plate is located on the bottom of the device. Synchronize time with iPod/ iPhone When the docking system is connected to power and an iPod/iPhone is docked, the docking system synchronizes time with the iPod/Phone automatically. » Time is stored in the docking system even if the ipod/iPhone is disconnected. EN 7 English 3 Get started Set time format 1 4 Play from iPod/ iPhone You can enjoy audio from iPod/iPhone through this unit. Charge the iPod/iPhone When the device is connected to power, the docked iPod/iPhone starts charging. Adjust volume To adjust volume, press VOLUME +/repeatedly. Compatible iPod/iPhone The docking system supports these iPod and iPhone models: Made for. · iPod touch (1st, 2nd, 3rd, and 4th generation) · iPod classic · iPod with video · iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) · iPod with color display · iPhone 4 · iPhone 3GS · iPhone 3G · iPhone Listen to audio from iPod/ iPhone 1 2 Place an iPod/iPhone in the dock. Play audio from the iPod/iPhone. Tip · To pause/resume play, press . · In iPod/iPhone mode, if an external audio device is connected, the device switches to MP3 Link mode. Remove the iPod/iPhone Pull the iPod/iPhone out of the dock. 8 EN Play audio from an external device You can listen to audio from an external device through this docking system. 1 2 Connect the MP3 link cable (not supplied) to: · the MP3-LINK socket. · the headphone socket of an external device. Play tracks in the external device (see the device's user manual). Set sleep timer This docking system can be switched off automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 15 30 60 OFF 90 120 Adjust display brightness Press levels. repeatedly to select different brightness EN 9 English 5 Other features 6 Product information Note · Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 20W RMS General information AC Power Model: AS190-100AE180; Input: 100-240 V ~, 50/60Hz, 0. 7A; Output: 10V 1. 8A <12 W <2 W 5 V, 1 A 290 x 158 x 113 mm 2. 02 kg 1. 47 kg Operation Power Consumption Standby Power Consumption Max. Load for iPod/ iPhone Dimensions - Main Unit (W x H x D) Weight - With Packing - Main Unit 10 EN Warning · Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. [. . . ] Specifications are subject to change without notice. Trademarks are the property of Koninklijke Philips Electronics N. V. [. . . ]