User manual PHILIPS AD752

[. . . ] liquid filled objects, lighted candles). Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Warning •• Never remove the casing of this apparatus. •• Never place this apparatus on other electrical •• Ensure that you always have easy access to the power equipment. [. . . ] If not, press . 1 2 3 4 Press to select Bluetooth source. »» The Bluetooth icon blinks. Turn on Bluetooth function on your device. • Different devices may have different way to activate Bluetooth. Scan Bluetooth devices that can pair with your device. When “AD752” is displayed on your device, select it to start connection. »» If connection is successful, you will hear double beep confirmation tone, and the Bluetooth icon stops flashing. »» A different Bluetooth icon is displayed on your device. • To pause or resume play, press . 7 EN 5 Play audio on your device. »» Audio streams from your device to the docking speaker. Tip Tip •• When your iPod/iPhone is being charged, you can still listen to audio from the external device. •• If your Bluetooth device has been paired with AD752 before, you just need to find out “AD752” on your Bluetooth menu, then confirm the connection. Adjust volume During play, press -/+ to adjust volume. To disconnect Bluetooth: • Press again; • Deactivate Bluetooth function on your device; or • Move the device beyond the communication range. Play from an external audio device With this docking speaker, you can also enjoy audio from an external device such as an MP3 player. 1 2 Connect an MP3 link cable (not supplied) to: • the MP3-LINK socket at the back of the docking speaker. • the headphone socket on an external device. »» The docking speaker switches to MP3 link mode automatically. Play audio on the device (see the device's user manual). EN 8 5 Product information Note •• Product information is subject to change without prior notice. General information AC Power Model: AS190-100AI180 (Philips); Input: 100-240 V ~, 50/60Hz, 0. 7A; Output: 10 V 1. 8 A 15 W <1 W 5V 1A Specifications Amplifier Total Output Power Signal to Noise Ratio MP3 Link 10 W per channel x 2 > 62 dBA 650 mV RMS Operation Power Consumption Standby Power Consumption Max. load for iPod/ iPhone Dimensions - Main Unit (W x H x D) Weight - Main Unit 290 x 159 x 113 mm 1. 5 kg Bluetooth Standard Frequency band Range Bluetooth Standard Version 2. 1+EDR 2. 402~2. 480 GHzISM Band 10m (free space) Speaker Speaker Impedance Speaker Driver 4 ohm 2 5” 9 EN 6 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. When you contact Philips, make sure that the device is nearby and the model number and serial number are available. [. . . ] iPod and iPhone are trademarks of Apple Inc. , registered in the U. S. and other countries. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When you see the crossed-out wheel bin symbol attached to a product, it means the product is covered by the European Directive 2002/96/EC: This product complies with the radio interference requirements of the European Community. Never dispose of your product with other household waste. [. . . ]