User manual PHILIPS AD902W

[. . . ] You can also connect your PC to the TV with an HDMI or VGA cable. Programme guides You can find out what's on and what's coming up with the now and next EPG (Electronic Programme guide) or eight day EPG. Programme guides are provided by broadcasters or over the Internet. If you connect your TV to the Internet, you can access more extensive programme details. EasyLink If you connect your TV to HDMI-CEC (Consumer Electronic Control) enabled devices, such as a Blu-ray player or home theatre, you can control them at the same time with one remote control. Simply switch on EasyLink after connection. Smart TV You can make your TV the centre of your digital life with the Smart TV suite of applications:  If you connect your TV to the home network, you can share movies, pictures and music from a computer or media server on your home network. [. . . ] Press the Navigation buttons to set the sleeptimer. The sleeptimer can be set up to 180 minutes, in steps of ten minutes. To switch off the sleeptimer, set it to zero minutes. After the specified time, the TV switches to standby. Set locks and timers Clock You can display a clock on the TV screen. The clock displays the time that is broadcast by your TV service operator. The clock is displayed on the lower right hand corner of the TV screen. Change the clock mode You can change the clock mode to automatic or manual. By default, it is set to automatic mode, which synchronises it to Coordinated Universal Time (UTC). If your TV cannot receive UTC transmissions, change the clock mode to [Manual]. Select [Setup] > [TV settings] > [Preferences]. Select [Automatic], [Manual] or [Country dependent], then press OK. One-touch standby When you press on the TV remote control, the TV and all HDMI-CEC compliant devices switch to standby mode. EasyLink remote control You can control multiple HDMI-CEC compliant devices with your TV remote control. System audio control If you connect an HDMI-CEC compliant device that includes speakers through the HDMI ARC connector, you can choose to hear the TV audio from those speakers instead of the TV speakers. Synchronise audio If you connect your TV to a home theatre, you can synchronise the audio and video to avoid lag between the picture and sound. Retain picture quality If your TV picture quality is affected by the picture-processing features of other devices, you can switch on Pixel Plus Link to retain picture quality. Maximise display for subtitled video Some video subtitles can create a separate subtitle bar under the video, which limits the video display area. To maximise the video display area, you can switch on auto subtitle shift and display the subtitles on top of the video image. Listen to another device when TV is in standby You can listen to a connected HDMI-CEC compliant device through the TV speakers, even when the TV is in standby. What you need  Connect at least two HDMI-CEC compliant devices through HDMI. See Connect your TV > About cables > HDMI (Page 42).  Configure each HDMI-CEC compliant device properly  Switch on EasyLink Switch on EasyLink 1. Select [Setup] > [TV settings] > [EasyLink]. Select [On] or [Off], then press OK. EN 29 English Control devices simultaneously If you connect multiple HDMI-CEC devices that support this setting, you can control all such devices through the TV remote control. [. . . ] If your router has a firewall or security settings, make sure that it allows Smart TV data to pass through check your router documentation for details. Open Internet access via Smart TV is slow:  Try to improve the signal quality between the router and TV if you are accessing the Internet with a wireless connection. See the router's documentation for details.  Always use a fast broadband connection wherever possible. [. . . ]