User manual PHILIPS AE2480

[. . . ] Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires. Recording and playback of material may require consent. See Copyright Act 1956 and The Performer's Protection Acts 1958 to 1972. English Congratulations on your purchase and welcome to Philips!To fully benifit from the support that Philips offers, register your product at Controls Side panel (see 1) 8 SET TIME ­ in standby mode, sets the clock 9 TIMER/SET TIMER ­ sets the time to switch on or off the set automatically ­ activates or deactivates timer 0 LOCK ­ disables all other keys !p ­ 3. 5 mm stereo headphone socket @ LINE IN ­ inlet for external sound source # DC jack ­ inlet for power cord www. philips. com/welcome. Supplied Accessories ­ 1 x AC/DC certified switching adapter (PHILIPS, Model No. : ED4120090060A, Input: 230V~ 50Hz, 70mA, Output: 9V, 600mA) ­ Audio cable Top & front panels (see 1 ) 12 ­ switches on/off the standby mode 2 AUTO SCAN ­ in FM, MW, LW, and SW mode, scans stations and stores them as presets automatically 3 Number Keys ­ press and hold to store preset stations 4 SLEEP ­ switches the set off automatically after the set time 5 Telescopic antenna ­ improves radio reception 6 VOLUME +/­ ­ adjusts volume level 7 DISPLAY ­ displays time or radio frequency TUNING 1 / 2 ­ in FM/MW/LW/SW mode, fine tunes a station SOURCE ­ selects FM, MW, LW, SW, or AUX mode CAUTION High voltage! [. . . ] When a station is received, search stops and Sr chdisappears. · · 2 Helpful hints: ­ You can press any button to exit automatic search. ­ Manual tuning By using this feature, it is possible to manually tune to a specific channel frequency. In addition to antenna orienting for better radio reception, the optimum reception can also be obtained by using this feature. · In FM, MW, SW, and LW mode, press TUNING 1 / 2 to tune to stations. Helpful hints: Press 1 / 2 once to increase or decrease the frequency by 5KHz. But the frequency change is not displayed. Press 1 / 2 twice to increase or decrease the frequency by 10KHz. The frequency change displayed is +/- 0. 01MHz. ­ Switching on radio 1 2 Press 2 to switch on the set. Press SOURCE to select FM, MW, SW, or LW waveband. Waveband and radio frequency are displayed (see 3). ­ ­ Radio Storing preset stations automatically · In FM, MW, SW, and LW mode, press and hold AUTO SCAN until SCAN appears. The set scans stations with strong signal strength and stores them as preset stations automatically. 5 Clock/Timer Press SET TIME once to confirm. Helpful hints: During setting time, if you press 2 or do not operate for more than 10 seconds, the set automatically exits time setting. ­ Storing preset stations manually You can store up to 10 stations for each band respectively on PRESET for easy access. 1 In FM, MW, SW, and LW mode, tune to your desired radio station (See "Auto tuning" and "Manual tuning"). Press and hold number keys to store the preset station. Helpful hints: If you have already saved a FM, MW, SW, or MW station in that preset number, it will be overwritten by a new station. Preset stations of each band do not overwrite each other. 4 5 1 2 3 Setting timer You can only set timer in standby mode. Press and hold TIMER/SET TIMER until ON appears and hour digits flash. Press TIMER/SET TIMER once to confirm. 2 ­ ­ 6 7 Selecting a preset station · In FM, MW, SW, and LW mode, press NUMBER 1-10. 8 9 Viewing clock You can also view clock in tuner mode. · Press DISPLAY repeatedly. FM, MW, SW, or LW flashes. 10 Press VOLUME +/- or SOURCE to select band for timer. [. . . ] Using headphones at a high volume can impair your hearing. Reduce its length if the signal is too strong. · For MW, the set uses a built-in antenna. Direct this antenna for best reception by turning the whole set. [. . . ]