User manual PHILIPS AE5010

[. . . ] Over time your hearing `comfort level' adapts to higher volumes of sound. So after prolonged listening, what sounds `normal' can actually be loud and harmful to your hearing. To guard against this, set your volume to a safe level before your hearing adapts and leave it there. To establish a safe volume level: · Set your volume control at a low setting. [. . . ] · UseonlytheACadaptorspecifiedbythemanufacturerorsoldwiththisunit. Never pull the cord. on the back or the underside of the product. Note · The type plate is on the back of the apparatus. 1 Connect one end of the AC adaptor to the DC socket on the main unit. 2 Connect the other end of the AC adaptor to the wall outlet. Option 2: Battery power Caution · Riskofexplosion!Keepbatteriesawayfromheat, sunshineorfire. Neverdiscardbatteriesinfire. · Do not mix batteries (old and new or carbon and alkaline, etc. ). · Remove batteries if they are exhausted or if the unit is not to be used for a long time. 1 12 Open the battery compartment at the back of the unit. EN 2 Insert 4 AA size batteries (not supplied) with correct polarity (+/-) as indicated, then close the battery compartment. 3 The unit is ready to operate. Note · Batteries contain chemical substances, so they should be disposed of properly. Turn on/off 1 Press . » [Welcome to Philips Audio] is displayed. » The radio goes to the last selected source. 1 To turn off the unit: Press again. Adjust the volume level 1 During play, press +/- to increase/decrease the volume level. EN 13 4 1 2 1 2 Listen to FM radio Press DAB/FM repeatedly to select FM radio. Press / to tune to a radio station. Tune to FM radio Search FM radio stations Tune to FM radio. Press and hold / for more than two seconds to start searching stations. » The FM tuner tunes to a station with strong reception automatically. Repeatstep2ifnecessaryuntilyoufindthedesiredstation. 3 Store FM stations manually You can program a maximum of 10 preset FM radio stations. 1 2 3 4 Tune to your desired FM station. Press and hold PRESET for two second, » The preset number is displayed. Press / to select the desired preset number. » The stored radio frequency and number are displayed. Note · To overwrite a preset station, store another station in its place. 14 EN Select a preset FM radio station 1 2 3 4 Press DAB/FM repeatedly to select FM radio. Press PRESET to enter the preset channel list. Press ENTERtoconfirmtheselection. Note · When you go through the preset station list, if no button is pressed within three seconds, the radio tunes to the showed preset station. Use FM menu 1 2 3 4 In FM mode, press and hold INFO to enter the FM menu. Press / to scroll the menu options: · [Audio setting] · [System] To select an option, press ENTER. Repeat step 2-3 if sub-option is available under one option. [Audio setting] This function enables you to select mono or stereo · [Forced mono] Select mono broadcast. · [Stereo allowed] Select stereo broadcast. [System] · · [Factory reset] Resets all the settings of this radio player to factory default. [SW version] Software version of the radio player is shown. Note · If no button is pressed within 10 seconds, the menu exits. EN 15 5 Listen to DAB radio Tune to DAB radio WhenyouentertheDABmodeforthefirsttime, theradioplayershows[DAB mode] for two seconds and enters the DAB menu. [. . . ] ­ With DAB digital stations there are no frequencies to remember, and sets are tuned by station name, so there's no returning on the move. Digital radio operation is made up of a single block of frequencies called a multiplex. Each multiplex works within a frequency spectrum, such as Band III for DAB broadcasts. DAB BROADCASTERS AND DLS Each DAB broadcaster (or multiplex operator) also provides text and audio data services. [. . . ]