User manual PHILIPS AJ100-37B

[. . . ] Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers. Know these safetysymbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. For Customer Use Enter below the Serial No. which is located on the bottom of the cabinet. Retain this information for future reference. [. . . ] Some states do not allow the exclusions or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights. You may have other rights which vary from state/province to state/province. Philips, P. O. 30006-0026 3121 233 48801 ENVIROMENTAL INFORMATION All unnecessary packaging material has been omitted. The packaging can be easily separated into three materials: cardboard, polystyrene and plastic. Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment. This product complies with the FCC-Rules, Part 15 and with 21 CFR 1040. 10. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. Canada English: This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications. This Class B digital apparatus complies with Canadian ICES-003. Français : Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère des Communications du Canada. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. English SUPPLIED ACCESSORIES ­ 1 X AC 7. 5V adapter (Input: 120 ~ 60Hz 30mA, Output: 7. 5V TOP AND FRONT PANEL (See 1) 1 REPEAT ALARM / BRIGHTNESS CONTROL ­ switches off the alarm for a 9 minute period ­ changes the brightness of the display illumination ­ stops SLEEP function 2 DISPLAY ­ shows clock/alarm times and status of the set 3 ALARM RESET / SLEEP ­ stops active alarm for 24 hours ­ activates the radio for sleep function ­ displays/adjusts/switches off sleep timer 4 ALARM ­ switches on/off buzzer mode ­ displays time 5 RADIO ON/OFF ­ switches the radio on/off; displays radio frequency ­ switches off sleep timer 6 ALARM ­ switches on/off radio mode ­ displays time 7 RESET ­ press if the set / display does not react to operation of any button SIDE PANEL (See 1) 8 TUNING +/- ­ tunes to radio stations 9 Pigtail ­ improves FM reception 0 DC 7. 5V ­ socket for AC/DC 7. 5V adapter !SET AL / PRESET 1 ­ sets AL time ­ stores, recalls and shows station 1 @ SET AL / PRESET 2 ­ sets AL time ­ stores, recalls and shows station 2 250mA) # MIN + / PRESET 3 ­ adjusts the minutes for clock and alarm times ­ stores, recalls and shows station 3 $ SET TIME / PRESET 4 ­ sets the clock time ­ stores, recalls and shows station 4 % HR + / PRESET 5 ­ adjusts the hours for the clock and alarm times ­ stores, recalls and shows station 5 ^ VOLUME ­ adjusts the sound level POWER SUPPLY Mains adapter 1 Connect the mains adapter to the set's DC 7. 5V socket and to the power socket. Helpful hints: To avoid damage to the set, use only the adapter supplied!The type plate is located on the bottom of the set. SELF-POWERED BACK-UP The self-powered back-up conveniently allows your preset stations, alarm and clock time settings to be stored for up to 3 minutes when there is a power interruption e. g. The complete clock radio and backlight illumination will be switched off. If power supply returns after 3 minutes and the display shows: · clock time blinking - indicates you need to re-adjust the clock time. BASIC FEATURES Reset Should your set receive external interference e. g. static electricity from carpets, thunderstorms, etc. [. . . ] Do not open. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. - Modification of the product could result in hazardous radiation of EMC or other unsafe operation. TROUBLESHOOTING If a fault occurs, first check the points listed below before taking the set for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service centre. [. . . ]