User manual PHILIPS AJ1003

[. . . ] Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the apparatus (e. g. liquid filled objects, lighted candles). Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. [. . . ] SET TIME/PROG · Activate the clock time setup. PRESET +/PRESET · Adjust the date, clock time and alarm time. · Select a programmed radio station. DATE · Display the preset time, month, day and year. Display panel e f g h i j k l m n 3 Get started Caution · Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. ___________________________ Activate the battery Caution · Riskofexplosion!Keepbatteriesawayfromheat, sunshineorfire. When the apparatus is not used for long · Batteries contain chemical substances, so they should be disposed of properly. Neverdiscardbatteriesinfire. 1 Remove the protective tab to activate the battery. To replace the battery (See Figure B): 1 Open the battery compartment. 2 Insert one lithium CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. Connect power Caution · Risk of product damage!Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the apparatus. When you unplug the AC power adapter, always pull the plug from the socket. · Before connecting the AC power adapter, ensure you have completed all other connections. 1 Connect the power adapter to · the DC IN (DC 5V) jack on the back of the main unit. · the power socket. 5 Set time and date 1 2 3 4 5 6 7 8 1 In clock mode, press and hold SET TIME/PROG for 2 seconds. » 12-hour or 24-hour format is selected. Repeat steps 2-3 to set the day. View the preset date Press DATE repeatedly. » The clock time, month, day and year are displayed consequently. 4 1 2 Listen to radio Press SOURCE repeatedly to turn on the radio. » FM and the current radio frequency appear. Press +/- (on + TUNING -) repeatedly to tune to a radio station. Tune to a radio station Adjust the volume 1 Press +/- (on - VOLUME +) repeatedly. Program radio stations automatically Note · You can program a maximum of 20 preset radio stations. 1 2 Press SOURCE repeatedly to turn on the radio. Press and hold SET TIME/PROG for 2 seconds. » All available stations are programmed in the order of waveband reception strength. [. . . ] No power · Ensure that the Mains cord is connected securely. · Ensure that there is power at the AC Mains. No response from the unit · Disconnect and reconnect the AC power plug, then turn on the unit again. Poor radio reception · Increase the distance between the apparatus and your TV or VCR. [. . . ]