User manual PHILIPS AJ210

[. . . ] This set complies with the radio interference requirements of the European Community. 2 1 Clock Setting the clock and date (see 2) 1 2 · The clock uses 24-hour time format. Hold down or press TUNING +/- repeatedly to adjust the time digits. When it comes to adjust month and day, you may press DATE to change the display order between month and day. [. . . ] Helpful hints: ­ In standby mode, press DATE to display month and day information. In radio mode, to display alarm time, press ALM 1/ALM 2. ­ The currently displayed alarm time is the time for the bracketed (selected) AL1 or AL2 (See 4). Selecting alarm mode (activating) 1 2 Press RADIO ON/OFF to switch to standby. Select your choice of alarm mode: either radio, or buzzer by using the RADIO·BUZ slider. Press ALM 1/ALM 2 once or more to display . At the set alarm time, radio or buzzer will switch on automatically. Switching off the alarm There are three ways of switching off the alarm. Unless you choose to cancel the alarm completely, the DAILY ALARM RESET option will be automatically kept activated from the time your alarm first goes off. call at the same time for the following day: Daily alarm reset If you want the alarm to be stopped immediately but also wish to repeat the alarm 1 During the alarm call, press once SLEEP/ALARM RESET or RADIO ON/OFF. Repeat alarm This will repeat your alarm call at 9-minute intervals. During the alarm call, press REPEAT ALARM/BRIGHTNESS CONTROL. Sleep Switching off the alarm completely Press once or more corresponding ALM 1 or ALM 2 until disappears. Sleep The clock radio has a built-in sleep timer, which enables the set to be automatically switched off during radio playback after a set period of time. Setting the sleep time 1 During radio playback, set your timer by pressing repeatedly SLEEP until the desired timer option appears. Selections are follows (time in minute) 10=20=30=60=90=120=OFF =10 The set will turn off automatically at the selected time. To cancel the timer function, either press SLEEP once or more until "OFF" appears, or press RADIO ON/OFF to switch to standby. "SLEEP" disappears when sleep function is cancelled. Note: ­ The sleep function does not affect your alarm time setting(s). 2 3 3 · Illumination brightness · Press REPEAT ALARM / brightness control once or more. The brightness of the display can be adjusted: High Low Off High . Low battery indication When the batteries of the unit are running low, the low battery icon will be displayed, indicating that the batteries should be replaced soon. 1 Weather forecast and Indoor thermometer Weather forecast The unit is capable of detecting atmospheric pressure changes. [. . . ] ­ Electrical malfunction · Press RESET hole on the bottom of the set with a ball pen. Occasional crackling sound during FM broadcast. · Extend the pigtail antenna fully. The alarm does not function. [. . . ]