User manual PHILIPS AJ3123

[. . . ] • The battery shall not be exposed to excessive heat such as sunshine, fire or the like. • This clock radio shall not be exposed to dripping or splashing. [. . . ] 3 Press TUNING repeatedly to select a number. 5 Repeat steps 1 to 4 to store other stations. interference. ) Tip •• To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET repeatedly to select a preset number. Adjust volume While listening, press VOL - / VOL + to adjust volume. 5 Other features Note Set alarm timer •• You can only set the alarm in standby mode. •• When alarm sounds, volume rises gradually. You cannot adjust the alarm •• Make sure that you have set the clock correctly. Follow the illustration to set the first alarm. ) volume manually. Tip •• The clock radio exits alarm setting mode when being idle for 10 seconds. Select alarm source You can select FM radio or buzzer as the alarm source. »» The corresponding alarm icon lights up. Activate/deactivate alarm timer Press AL1 or AL2 repeatedly to activate or deactivate the alarm timer. »» If the alarm timer is deactivated, the alarm indicator turns off. »» The alarm repeats ringing for the next day. Snooze the alarm When alarm sounds, press SNOOZE. »» The alarm snoozes and repeats ringing nine minutes later. ) Set sleep timer This clock radio can switch to standby mode automatically after a preset period. ) To deactivate the sleep timer: • Press SLEEP repeatedly until [OFF] (off) appears. 6 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Total Output Power Tuner (FM) Tuning range Tuning grid Sensitivity - Mono, 26 dB S/N Ratio - Stereo, 46 dB S/N Ratio Total Harmonic Distortion Signal to Noise Ratio General information AC power (power adapter) Brand name: Philips; Model: AS030-060-EI050; Input: 100-240 V ~, 50/60 Hz; 0. 15 A; 0. 5 A Output: 6 V <5 W <1 W 177 x 48 x 123 mm 0. 3 kg 0. 4 kg 87. 5-108 MHz 50 KHz <22 dBf <51. 5 dBf <3% >50 dBA 200 mW RMS Operation Power Consumption Standby Power Consumption Dimensions: Main Unit (W x H x D) Weight: -Main Unit -With Packing 7 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. [. . . ] Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. [. . . ]