User manual PHILIPS AJ3136/00C

[. . . ] AC power failure or when changing batteries. the complete clock radio and backlight illumination will be switched off. As soon as the power supply returns the display will indicate the correct time. [. . . ] After both the hours and minutes are set, press SET AL / TIME to confirm the setting. Time setting is also automatically confirmed after 10 seconds after you set the time. ⷠIt is not possible to adjust the alarm time during an alarm call or the repeat alarm mode. USING THE ALARM General (see 2) If you wish to use the alarm, first set the alarm time before selecting your choice of alarm mode. By rotating the set in 4 different position, you can choose Radio (FM) / Buzzer / Submarine / Frog to wake you up. As you rotate the set, AJ3136 interacts in the following way. You will : TM hear a special whirring sound effect TM see the backlight blink briefly. The hour and minute display will also adjust to match the new rotated position. tIP : · If you wish to deactivate or activate the whirring sound, press and hold on the HOUR + and RADIO ON / OFF buttons simultaneously. ⷠWhen the batteries on AJ3136 are low, the battery low icon blinks. No blacklight and sound effects are possible. REPEAT ALARM This will repeat your alarm call at 5 minute intervals. ⷠDuring the alarm call, press REPEAT ALARM· During alarm activated or repeat alarm mode, press ALARM ON / OFF once. SLEEP About Sleep This set has a built-in sleep timer, which enables the radio to be automatically switched off after a set period of time. [. . . ] WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. Do not open the set as there is a risk of electric shock!No sound ­ Volume not adjusted · Display error / no reaction to any controls ­ Electrostatic discharge / Electrical interference: set too close to TV, VCR or computer · Press the RESET hole inside battery compartment of the set with a ballpoint pen. [. . . ]