User manual PHILIPS AJ3138

[. . . ] · Do not mix batteries (old and new or carbon and alkaline, etc. ). · Remove batteries when the unit is not used for a long time. Apparatus shall not be exposed to dripping or splashing. Do not place any sources of danger on the apparatus (e. g. [. . . ] repeat alarm/brightness control · Repeat the alarm. tuning · Tune to a radio station. Display panel radio · Turn on/off the radio. d e f g h i Battery compartment Antenna (Inside the battery compartment) DC IN jack set/scan · Set the clock. rec/play · Record a piece of sound. display · Toggle between different information. sleep · Set sleep timer. j k l m n o 3 Get started Caution · Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. ___________________________ Install batteries Caution · Riskofexplosion!Keepbatteriesawayfromheat, sunshineorfire. When the apparatus is not used for long · Batteries contain chemical substances, so they should be disposed of properly. Neverdiscardbatteriesinfire. 1 2 » 3 Open the battery compartment. Insert 3 AAA batteries (not supplied) with correct polarity (+/-) as indicated. Close the battery compartment. Tip · When the unit is powered by battery, the screen lights up for 5 seconds after any operation. Connect power Caution · Risk of product damage!Ensure that the power voltage corresponds · Risk of electric shock!When you unplug the AC adaptor, always pull · Before connecting the AC adaptor, ensure you have completed all other connections. to the voltage printed on the back or underside of the apparatus. 1 Connect the power cord to · the DC IN jack on the back of the main unit · the power socket. Set time and date » 1 2 3 4 5 6 7 8 In clock mode, press set/scan. Repeat steps 2-3 to select 12 hour or 24 hour format. Repeat steps 2-3 to set the month-day display mode. 4 1 2 Listen to radio Press radio to turn on the radio. Rotate tuning clockwise or counter-clockwise to tune to a radio station. Tune to a radio station Program radio stations automatically Note · You can program a maximum of 20 preset radio stations. » » 1 2 Press radio repeatedly to turn on the radio. All available stations are programmed in the order of waveband reception strength. Thefirstprogramedradiostationbroadcastsautomatically. Program radio stations manually Note · You can program a maximum of 20 preset radio stations. 1 2 » 3 4 5 6 Press radio repeatedly to turn on the radio. Rotate tuning clockwise or counter-clockwise to tune to a radio station. [. . . ] To turn off the sleep timer: 1 Press sleeprepeatedly until [OFF] (off )appears or press radio. » is displayed when sleep timer is on and disappears when it is off. Set nap timer » 1 Press nap repeatedly to select the nap time (in minutes). The alarm rings after the set period of time. To turn off the nap timer 1 Press nap repeatedly until [OFF] is displayed. Record a piece of sound Note · You can record for a maximum of 8 seconds. » » 1 Press and hold rec/play during the whole process of recording. When the sound is recorded, Tip · Keep the sound source close to mic on the top of the unit. [. . . ]