Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS AJ3250-05W. We hope that this PHILIPS AJ3250-05W user guide will be useful to you.
Lastmanuals help download the user guide PHILIPS AJ3250-05W.
Detailed instructions for use are in the User's Guide.
[. . . ] 1 Check if the mains supply, as shown on the type plate located on the bottom of the set, corresponds to your local mains supply. If it does not, consult your dealer or service centre. 2 Connect the mains plug to the wall socket. [. . . ] Press SET TIME or RADIO ON / SLEEP to exit the demo mode, before you set the times or switch on the Radio. 3 To disconnect the set from the mains supply completely, withdraw the mains plug from the wall socket. : please follow the instructions on the bottom of this sheet. 3W CLOCK MEMORY BACKUP The clock memory backup allows your alarm and clock time settings to be stored for up to a day when there is a power interruption e. If you do not intend to use the set for a long time, withdraw the mains plug from the wall socket. In addition to this, it is advisable to remove the battery from the clock radio. This will prevent any danger of leakage and the clock radio will not be damaged. ⷠDo not expose the set to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. ⷠTo clean the set, use a soft, slightly dampened chamois leather. Release HOUR or MINUTES when you have reached the correct setting. After both the hours and minutes are set, press SET TIME or SET ALARM 1 (or 2) to confirm the setting. TM If SET TIME is pressed, you will hear two short beeps. ⷠTime setting is also automatically confirmed 10 seconds after you set the time. ⷠIt is not possible to adjust the alarm time during an alarm call or the repeat alarm mode. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. if the mains plug contains a fuse , this should have a value of 5 Amp. [. . . ] If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Extend and position the pigtail aerial The alarm does not function  Alarm time/ mode not set · 2 Select your waveband using the BAND switch. SETTING THE ALARM GENERAL If you wish to use the alarm, first set the alarm time before selecting your choice of two alarm modes, radio or buzzer/cockcrow. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS AJ3250-05W
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS AJ3250-05W will begin.
