User manual PHILIPS AJ3270D

[. . . ] Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 2 Your clock radio Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. Introduction With this clock radio, you can: · listen to FM radio; · enjoy audio from iPod/iPhone; · know the time; and · wake up by buzzer alarm, radio, or audio in iPod/iPhone. What's in the box Check and identify the contents of your package: · Main unit (with a battery) · AC adapter · User manual Overview of the main unit A a iPhone · Select or exit iPhone/iPod mode. d Display panel · Show current information. f SCAN /PROG/SET TIME · Scan/store radio stations. [. . . ] Note · When iPhone/iPod is connected, the clock radio synchronizes time with iPhone/iPod automatically. 2 3 4 5 4 Play from iPhone/iPod You can enjoy audio from iPhone/iPod through this clock radio. Compatible iPhone/iPod The clock radio supports these iPod and iPhone models: Made for. · iPod touch (1st, 2nd, 3rd, and 4th generation) · iPod classic · iPod with video · iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) · iPod with color display · iPod mini · iPhone 4 · iPhone 3GS · iPhone 3G · iPhone Listen to audio from iPhone/iPod E 1 2 3 Place the iPhone/iPod in the dock. Tip · Press iPhone again to switch to standby mode. Remove the iPhone/iPod F Pull the iPhone/iPod out of the dock. Charge the iPhone/iPod When the clock radio is connected to power, the docked iPhone/ iPod starts charging. Adjust volume G 5 Listen to FM radio Tip Tune to FM radio stations H · Position the antenna as far as possible from TV, VCR, or other · For better reception, fully extend and adjust the position of the antenna. radiation source. Note · To turn on/off radio, press RADIO. Store FM radio stations automatically You can store a maximum of 20 FM radio stations. » The clock radio stores all the available FM radio stations and broadcasts the first available station automatically. Store FM radio stations manually 1 2 3 4 5 Tune to an FM radio station. » The preset number begins to blink. Press PRESET +/- or TUNING +/- repeatedly to select a number. Repeat steps 1 to 4 to store other stations. Note · To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET +/- to select a preset number. 6 Other features Set alarm timer I Set alarm time You can set two alarms to ring at different time. Note · Make sure that you have set the clock correctly. 1 Press and hold AL1/AL2 for 2 seconds to enter alarm setting mode. » The hour and minute digits begin to blink. » Press HR+/- and MIN+/- repeatedly to set hour and minute. Press AL1/AL2 again to confirm. 2 3 Select alarm sound For the alarm sound, you can select buzzer, your last heard radio or played track in iPhone/iPod. Adjust AL1/AL2 RADIO·BUZZ·iPhone to select alarm sound for both alarms. Tip · When alarm time arrives and you are listening to radio or audio · If you have selected iPhone/iPod source, while no iPhone/iPod is connected, the clock radio switches to buzzer source instead. in iPhone/iPod, buzzer can only be activated as alarm sound. Activate/deactivate alarm timer 1 2 Press AL1/AL2 to view alarm settings. Press AL1/AL2 again to activate or deactivate the alarm timer. or appears if alarm timer is on and disappears if it » is off. · To stop alarm, press the corresponding AL1/AL2 . · The alarm repeats ringing for the next day. Snooze alarm When alarm sounds, press SNOOZE . » The alarm snoozes and repeats ringing five minutes later. To adjust alarm interval (in minutes), press SNOOZE repeatedly. 5 10 15 20 25 30 Set sleep timer This clock radio can switch to standby mode automatically after a preset period. Press SLEEP repeatedly to select the sleep timer period (in minutes). » When the sleep timer is activated, To deactivate the sleep timer, press SLEEP repeatedly until [OFF] (off) appears. 15 30 off 60 90 120 Adjust display brightness Press BRIGHTNESS repeatedly to select different brightness level: high, mid, and low. 7 Product information Note · Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2W RMS Tuner Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio FM: 87. 5 - 108 MHz FM: 50 KHz FM: <22 dBu FM: <28 dBu FM: <3% FM: >45 dB General information AC Power Model: AS100-050-AI200; Input: 100-240 V ~, 50/60Hz, 2. 0A 0. 5A; Output: 5 V <10 W <2 W 130 x 78 x 146 mm 0. 6 kg 0. 4 kg Operation Power Consumption Standby Power Consumption Dimensions - Main Unit (W x H x D) Weight - With Packing - Main Unit 8 Troubleshooting Warning · Never remove the casing of this apparatus. [. . . ] Please act according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health. Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed with normal household waste. Please inform yourself about the local rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. [. . . ]