User manual PHILIPS AJ3902

[. . . ] Refit the fuse cover. Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] Do not try to play a MP3-CD, CD-ROM, CD-RW, CDI, VCD, DVD or computer CD. 2 Select CD source by pushing CD·RADIO·BUZZER to CD. 4 Insert a CD with printed side facing up, and close the CD door. Flashing ---- is displayed briefly, then total CD track number. 6 To view CD track information, press DISPLAY. The current track number is displayed for several seconds (See 3), then it will switch back to clock display. 8 To interrupt, press );. To resume playback, press ); again. 10 To switch off CD playback and back to standby, press POWER. 1 3 2 3 4 Clock memory backup When a power failure occurs, the complete clock radio will be switched off. When the power supply returns, the time display shows 0:00 and you will need to reset the correct time on the clock. To retain the clock time and the set alarm time(s) in the event of an AC power failure or disconnection, insert a 9 volt battery, typed 6F22 (not supplied) into the battery compartment. This will act as a clock memory backup. ALM1 or ALM2 is also displayed, flashing. It will exit the clock setting mode without setting if there is 5-second inactivity. Press repeatedly, or hold down / § to adjust the hours. Press corresponding ALARM 1 or ALARM 2 to confirm the hour setting. Press repeatedly, or hold down / § to adjust the minutes. Press corresponding ALARM 1 or ALARM 2 to confirm the setting. When CD·RADIO·BUZZER is pushed in the CD position, selection of CD track number will be also prompted. Press / § to select desired track if you like. Repeat the steps above to set and activate the other alarm if necessary. 1 2 Selecting alarm mode Press POWER to switch to standby. Select your choice of alarm mode: either CD radio, or buzzer by using the CD·RADIO·BUZZER slider. [. . . ] During the alarm call, press REPEAT ALARM as indicated by the arrow located at the top panel. The corresponding ALM1 or ALM2 is still displayed, yet flashing. Switching off the alarm completely Press once or more corresponding ALARM 1 or ALARM 2 until ALM1 or ALM2 disappears. 5) You can select and change the various play modes before or during playback, and combine REPEAT modes with program. SHUFFLE ­ plays all tracks in random order. REPEAT ­ plays the current track continuously. REPEAT ALL ­ plays the entire disc/ program continuously. SHUFFLE REPEAT ALL ­ plays the entire 1 disc/program continuously in random order. [. . . ]