User manual PHILIPS AJ3915B

[. . . ] CD Clock Radio User manual Manuel d'utilisation Manual del usuario Gebruikershandleiding AJ3915 Meet Philips at the Internet http://www. philips. com W CLASS 1 LASER PRODUCT AJ3915 Printed in China JH-616 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. [. . . ] If you like, store any track more than once. In the stop position, press PROG to enter programming mode. 1 PROG and101 are displayed, and 01 is flashing, indicating the start of programming (See 4). Press or § to select desired track. 200 is displayed, and 00 is flashing, indicating the second program sequence is available. Repeat steps 2 to 3 to select and store all desired tracks. If you attempt to store more than 20 tracks, no tracks can be stored. To erase a program, select any of the following. ­ In stop position press PROG to enter program mode and press 9; ­ Open the CD door. ­ Press POWER to standby; ­ Select RADIO or BUZZER position. CD Player CD playback This CD clock radio can play only audio discs including CD-R (CD-recordable), CD-RW (CD-rewritable). Do not try to play a MP3-CD, CD-ROM, CD-RW, CDI, VCD, DVD or computer CD. 2 Select CD source by pushing CD·RADIO·BUZZER to CD. 4 Insert a CD with printed side facing up, and close the CD door. Flashing ---- is displayed briefly, then total CD track number. 6 To view CD track information, press DISPLAY. The current track number is displayed for several seconds (See 3), then it will switch back to clock display. 8 To interrupt, press );. To resume playback, press ); again. 10 To switch off CD playback and back to standby, press POWER. 1 Selecting a different track Press / § once or repeatedly until the desired track number appears on the display. In the stop position, press ); to start playback. The selected track number appears briefly on the display when you press , § to skip tracks, then it switches back to clock display. Auxiliary connection/Alarm 1 Finding a passage within a track During playback, press and hold down or §. The CD is played at high speed and low volume. [. . . ] Press corresponding ALARM 1 or ALARM 2 to confirm the setting. When CD·RADIO·BUZZER is pushed in the CD position, selection of CD track number will be also prompted. Press / § to select desired track if you like. Repeat the steps above to set and activate the other alarm if necessary. 2 3 3 4 4 5 · 1 · Troubleshooting If a fault occurs, first check the points listed below before taking the set for repair. [. . . ]