User manual PHILIPS AJ560

[. . . ] Remove the batteries if the set is not to be used for a long time. Batteries contain chemical substances, so they should be disposed of properly. Using AC power The set is operated with 9V DC power. Any other AC/DC adaptor may damage the set. [. . . ] >>:This symbol indicates that the station is a primary station with secondary service. <<:This symbol indicates that the station is a secondary station. · · 2 Resetting to the factory setting (also available in FM mode) Resetting to the factory setting will delete all of the preset stations. 1 2 In DAB or FM mode, press and hold MENU. "Press SELECT to confirm reset" is display. All the presets will be deleted, and "Philips DAB & FM Radio" is displayed. To not to reset, wait a few seconds until "Press SELECT to confirm reset" disappears. The radio will revert to the previous operating status. Helpful hints: ­ If there is no DAB coverage currently available, or DAB signal is too weak, in your area, no DAB station will be found, and information like "Station not available" will be displayed. Dimming LCD brightness 1 Press and hold INFO for 2 seconds to switch Dm on or off. Auto dim on will be activated if dim function is off in the last setting. Auto dim off will be activated if dim function is on in the last setting. 1 2 3 In DAB mode, press MENU to enter menu options. Press 1 / 2 repeatedly until "DRC value" is displayed. The current DRC level will be displayed on the first line. Press 1 / 2 to select a DRC value (DRC 0, DRC 1 and DRC1/2) displayed on the second line. Press SELECT to confirm the selection when the requied value is displayed. You should be able to hear the difference in compression immediately. 2 Manual tune By using this feature, it is possible to manually tune to a specific channel/frequency. In addition to antenna orienting for better radio reception, the optimum reception can also be obtained by using this feature. In DAB mode, press MENU to display "Manual tune" option. Display shows a channel and its frequency. Press 1 / 2 repeatedly until desired channel/frequency appears. The second line of the display shows the selected channel and its frequency. [. . . ] Do not turn up the volume so high that you can't hear what's around you. You should use caution or temporarily discontinue use in potentially hazardous situations. Do not use headphones while operating a motorized vehicle, cycling, skateboarding, etc. ; it may create a traffic hazard and is illegal in many areas. WARNING: Do not open the set as there is a risk of electric shock. Under no circumstances should you try to repair the set yourself, as this will invalidate the guarantee. [. . . ]