User manual PHILIPS AJ7030D

[. . . ] Remove batteries when the unit is not used for a long time. o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on the apparatus (e. g. OLTXLG ÀOOHG REMHFWV OLJKWHG FDQGOHV q Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. [. . . ] Press SET DJDLQ WR FRQÀUP » The hour digits begin to blink. Repeat Steps 2 to 3 to set the hour and minute. Note If clock is not manually set, when iPod/iPhone is connected, the clock radio synchronizes time from the iPod/iPhone automatically. Turn on Press . » The clock radio switches to the last selected source. Switch to standby mode Press to switch the clock radio to standby mode. » The clock (if set) appears on the display panel. 4 Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this clock radio. Compatible iPod/iPhone The clock radio supports these iPod and iPhone models: Made for. iPod touch (1st, 2nd, 3rd, and 4th generation) iPod classic iPod with video iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th generation) iPod with color display iPod mini iPhone 4 iPhone 3GS iPhone 3G iPhone Listen to audio from iPod/iPhone 1 2 3 Press SOURCE repeatedly to select iPod/iPhone mode. d Start to play audio from the iPod/iPhone. Remove the iPod/iPhone e Pull the iPod/iPhone out of the dock. Charge the iPod/iPhone When the clock radio is connected to power, the docked iPod/ iPhone starts charging. Adjust volume f 5 Listen to FM radio Tip Tune to FM radio stations Position the antenna as far as possible from TV, VCR, or other radiation source. For better reception, fully extend and adjust the position of the antenna. 1 2 3 Press SOURCE repeatedly to select FM tuner source. Press and hold TUNING +/- for 2 seconds. » The clock radio tunes to a station with strong reception automatically. Repeat steps 2 to tune to more stations. To tune to a station manually: 1 Press TUNING +/- UHSHDWHGO\ XQWLO \RX ÀQG RSWLPDO reception. Store FM radio stations automatically You can store a maximum of 20 FM radio stations. In tuner mode, press a hold SET for two seconds. » The clock radio stores all the available FM radio stations and EURDGFDVWV WKH ÀUVW DYDLODEOH VWDWLRQ DXWRPDWLFDOO\ Store FM radio stations manually 1 2 3 4 5 Tune to an FM radio station. » The preset number begins to blink. Press PRESET / repeatedly to select a number. Press SET DJDLQ WR FRQÀUP Repeat steps 1 to 4 to store other stations. Note To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET / to select a preset number. 6 Other features Set alarm timer Set alarm g In standby mode, you can set two alarms to ring at different time. Note Make sure that you have set the clock correctly. 1 2 3 4 Press and hold AL1/AL2 for two seconds to activate alarm setting mode. [. . . ] Poor radio reception Increase the distance between the unit and your TV or VCR. Alarm does not work Set the clock/alarm correctly. Clock/alarm setting erased Power has been interrupted or the power plug has been disconnected. Reset the clock/alarm. 9 Notice $Q\ FKDQJHV RU PRGLÀFDWLRQV PDGH WR WKLV GHYLFH WKDW DUH QRW expressly approved by Philips Consumer Lifestyle may void the user's authority to operate the equipment. This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. [. . . ]