User manual PHILIPS AJB4500

[. . . ] Only use attachments/accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. i j k l m Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 6 n o p Apparatus shall not be exposed to dripping or splashing. [. . . ] Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet. ) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. 10 2 Your clock radio Congratulations on your purchase, and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. philips. com/welcome. Introduction With this clock radio, you can enjoy both FM radio and Digital Audio Broadcasting (DAB) radio. You can also listen to portable audio players through this clock radio. For the alarm sound, you can select the FM radio, DAB radio, or the buzzer. What's in the box Check and identify the contents of your package: · Main unit · User manual · Quick start guide 11 Overview of the main unit a b c d e g h i j k f l n m o a · · · · · SELECT Set the clock. Display DAB and RDS information. b 12 c · · · · · · · · · · · · · · · SOURCE Select a mode: DAB, FM TUNER, MP3 LINK or clock (standby). Set the time for the clock and alarm. d e BRIGHTNESS CONTROL/REPEAT ALARM Select the display brightness. Select DAB menu option. f g h i j VOLUME Adjust the volume level. FM/DAB antenna Improve FM/DAB reception. Audio in cable Connect to a portable audio player. k l m 13 n o · · Power plug Power supply plug. Reset button Reset the clock radio. 14 3 Get started Caution · Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of your clock radio. The model number and serial number are on the bottom of your clock radio. ___________________________ Prepare FM/DAB antenna 1 Fully extend the antenna and fix it to the wall as shown below. 15 Connect power Caution · Risk of product damage!Ensure that the power supply · voltage corresponds to the voltage printed on the back or the underside of the clock radio. When you disconnect the power supply, always pull the plug from the socket. Never pull the cord. 1 Connect the power plug to the power outlet. Socket Set the clock 1 2 In standby mode, press and hold SELECT for two seconds. » [SYNC ON] is displayed and [ON] begins to blink. Press PRESET » to select ON or OFF. If you select [ON], the clock radio reads the DAB/RDS time and sets the clock automatically. 16 » If you select [OFF], the clock radio turns off the time synchronization. 3 4 5 6 7 8 9 Press SELECT to confirm. » The time format [24H] or [12H] begins to blink. Press PRESET » to select 24H or 12H. Press SELECT to confirm. The hour digits are displayed and begin to blink. Press PRESET » to set the hour. Press SELECT to confirm. The minute digits are displayed and begin to blink. Press PRESET to set the minute. Press SELECT to confirm the clock setting. Note · The accuracy of the transmitted time depends on the RDS · If the power supply is disconnected, the settings and clock are saved for 3 minutes. station that transmits the time signal. 17 4 1 Use your clock radio During play, press VOLUME volume level. to increase/decrease the Adjust the volume level Adjust display brightness 1 Press BRIGHTNESS CONTROL/REPEAT ALARM repeatedly to select different brightness of the display: · Full brightness · Half brightness · Backlight off Listen to FM radio 1 Press SOURCE repeatedly to select [FM--TUNER]. 2 Press TUNING To search for a radio station automatically: 1 2 Press TUNING Press SCAN. » The FM tuner tunes to a station with strong reception automatically. . Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 2 Press SOURCE repeatedly to select [FM--TUNER]. [. . . ] No power · · · · · Ensure that the AC power plug of the clock radio is connected properly. Ensure that there is power at the AC outlet. Disconnect and reconnect the AC power plug, then turn on the system again. Use a ball pen to press the reset button on the rear of the clock radio to restore factory settings. [. . . ]