User manual PHILIPS AJM180

[. . . ] 2 Autostore Autostore automatically starts programming radio stations from preset 1. This set complies with the radio interference requirements of the European Community. As soon as the AC power supply returns, the display will indicate the correct time. Insert the battery into the battery compartment for clock memory backup. [. . . ] 0 or later File name in Uicode UTF8 (maximum length: 128 bytes) The system will not play or support the following: Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display. 1 2 Playing a USB mass storage device Make sure that your AJM180 is being powered by AC mains. If USB is not selected, press SOURCE once or more to select it. If needed, use a suitable USB cable to connect between the device and AJM180's USB port. the device will automatically power on. If the device is not powered on, turn on the power manually, then re-connect it. AJM180's display shows the total number of playable audio files (Max. 5 Helpful hints: ­ Up to 800 playable audio files stored on a USB mass storage device can be played on AJM180. ⭠Up to 99 playable albums stored on a USB mass storage device can be selected and displayed on AJM180. ­ Make sure that file names of MP3 files end with . Mp3 and the file names of WMA files end with . ­ For USB device playing, if the display shows "OL", it means that the USB device is electrically overloading AJM180. The CD clock radio has a built-in sleep timer, which enables the set to be automatically switched off during radio, USB or CD playback after a set period of time. 1 Setting the sleep time Press SLEEP repeatedly until the desired timer option appears. Selections are as follows (time in minute) 2 3 60=45=30=15=0=60 The set will turn off automatically at the selected time. To cancel the timer function, either press SLEEP once or more until "0" appears (See 6), or press POWER to switch to clock mode. "SLEEP" disappears when sleep function is cancelled. Note: ­ The sleep function does not affect your alarm time setting(s). 5 6 To review a program, In the stop position, press and hold PROGRAM/SET TIME until all the stored tracks are displayed. to erase a program , select any of the following. ­ Pressing 9 (twice during playback or once in the stop position); ­ Pressing POWER; ­ Selecting TUNER, USB or AUX mode. Hold down or press HOUR/MIN repeatedly to adjust the hours and mintues. [. . . ] No naked flame sources, such as lighted candles, should be placed on the apparatus. Adequate ventilation with a minimum gap of 6 inches between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up. The mechanical parts of the set contain self-lubricating bearings and must not be oiled or lubricated. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing. [. . . ]