User manual PHILIPS AK730

[. . . ] DVT7000 8. 1 Radio mode 8. 2 Pre-set radio station 8. 2. 1 Saving radio stations automatically 8. 2. 2 Saving a radio station manually 8. 2. 3 Deleting a pre-set radio station 8. 3 Set output devices for radio playback 8. 4 Record from FM radio 37 37 37 37 38 38 38 39 9. 1. 13 Enable/disable the record indicator 9. 1. 14 Selecting an external sound source 9. 2 Display settings 9. 2. 1 Select language 9. 2. 2 Adjusting the display contrast 9. 2. 3 Enable/disable the back lighting (DVT3000 ?DVT7000) 9. 3 Device settings 9. 3. 1 Set date & time 9. 3. 2 Enable/disable ClearVoice 9. 3. 3 Equalizer settings (DVT3000 ?DVT7000) 9. 3. 4 AUTO-OFF 9. 3. 5 Alarm clock 9. 3. 6 Enable/disable key and signal tones 47 47 48 48 48 48 49 49 50 50 51 51 52 9 Settings 9. 1 Record settings 9. 1. 1 Set file location 9. 1. 2 Adjust the record settings automatically (DVT3000 ?DVT7000) 9. 1. 3 Set recording quality 9. 1. 4 Set microphone sensitivity 9. 1. 5 Enable/disable wind filter (DVT3000 ? [. . . ] DVT7000: Press F1/F2 to call up the playback speed and ClearVoice functions or to display the date, time and remaining recording time. 6. 4 Quick search You can scan backward or forward in the current file at a fast speed. This allows to find a specific part of the recording. 1 6. 3 Adjusting playback speed Press and hold the h or b buttons during playback or when the device is stopped XX to scan backward or forward in the current file at a fast speed. Release the key XX to resume playback at the selected speed form the current position. 1 Press and hold the e key for at least 2 seconds during playback. a This will switch the device to slow playback. The c icon will be 2 displayed. b This will switch the device to fast playback. The U icon will be displayed. c This will switch the device to normal playback. The S icon will 6. 5 Repeat a file / repeat a sequence You can automatically repeat playback of a certain file, folder or sequence (=loop). be displayed. 1 2 3 In stop mode (start-up screen), press MENU. Press the record key, g, to confirm. Table of contents Playback 33 4 Press +?/??to repeat a certain file, folder or sequence automatically. XX The repeat mode icon will be displayed.  ?repeat a file ?repeat all files in a folder à?repeat a selection/sequence a Press INDEX/a, to repeat a sequence at a chosen start point. b Press INDEX/a, to repeat a sequence at a chosen end point. /?b to select the recording that you wish to delete. Press and hold the zand/or ERASE key for at least 2 seconds. Sequential file numbers are reassigned automatically. 4 5 6 7 8 36 Edit & delete Table of contents 8 Radio DVT5000 ?DVT7000 Note Tip ? Press F1 to exit the radio mode. Tip ? The headphones are the device's antenna. Radio reception is only possible if headphones are connected to the device. ? You can also use Menu to enter/exit the radio mode. a In stop mode (start-up screen), press MENU. to select the FM radio on and Off function. d Press the record key, g, to confirm. 8. 1 Radio mode 1 2 3 4 5 Connect the headphones to the device. (see also chapter 4. 11. 1 How to connect headphones, page 22). Press and hold the MENU key for at least 2 seconds to enter the radio mode. /?b to start seeking for the next radio station. [. . . ] ? Memory card is not formatted (file system FAT32). XX Format the memory card in the device. I cannot hear anything from the headphones External microphone records Switch external sound source to stereo mono sound only microphone. 56 Service Table of contents 11 Appendix The information in this user manual has been produced to the best of our knowledge. It (particularly the technical data) may be modified or updated at any time without prior notice. Technical data USB connection Microphone connection Headset connection Display Internal memory AK730 ?batteries/rechargeable batteries) DVT3000 ? [. . . ]