User manual PHILIPS AQ4420/00M

[. . . ] If the mains plug contains a fuse, it should have a value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 3 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13-Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. [. . . ] Press the clip of the black terminal and fully insert the stripped portion of the black (or unmarked) speaker cable into the socket, then release the clip. 6 Preparations D Optional connections The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details. Connecting a USB device or memory card By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the system, you can enjoy the device's stored music through the powerful speakers of system. Insert the USB device's USB plug into the socket on the set. OR for devices with USB cables: Insert one plug of the USB cable (not supplied) to the socket on the set. Insert the other plug of the USB cable to the USB port of the USB device. OR Remove the plastic protective sheet Before using the remote control Pull out the plastic protective sheet. Replacing the remote control battery (lithium CR2025/ CR2032) 1 2 3 Press the slot on the battery compartment. Replace a new battery and fully inser t the battery compartment back to the original position. 1 2 1 2 for memory cards: Insert the memory card into a card reader (not supplied). Use a USB cable (not supplied) to connect the card reader into the socket on the set. Connecting other equipment to your system 1 2 CR2025 Use a line-in-cable to connect AUX IN to the analogue audio out terminals of an external equipment (TV, VCR, Laser Disc player, DVD player or CD Recorder). 3 CAUTION!Batteries contain chemical substances, so they should be disposed of properly. 7 English Controls (illustrations on page 3) English Main unit 1 IR ­ ­ remote sensor (iPod/USB) starts or interrupts playback. T @ REPEAT ALARM ­ ­ stops an active alarm for a 9 minute interval. activates/ deactivates alarm setting mode turns alarm on/off SLEEP selects the sleeper time. (iPod/USB) star ts or interrupts playback. selects sound source for a USB audio player/ other audio equipment. interrupts and resumes sound production. 1 2 3 4 5 6 7 8 9 % $ # @ ­ ­ ­ 6 ALBUM/PRESET3 7 ! ­ 8 VOLUME -/+ ­ ­ ­ 9 ALARM 0 0 ­ ­ ­ ­ ­ !PROG/CLOCK @É Å # DBB Remote Control 1y ­ ­ ­ ­ ­ ­ switches on the system to the last sound source played. selects the sound source for your iPod player. Notes for remote control: ­ First select the source you wish to control by pressing one of the source select keys on the remote control (for example USB/ AUX). ­ Then select the desired function (for example ÉÅ, S , T). ­ ­ $ USB/AUX % MUTE ­ 2 iPod 3 TUNER 49 9 English Basic Functions English Switching the system to standby mode Press STANDBY-ON B (or B on the remote control). The volume level (up to a maximum volume level of 12), last selected mode, source and tuner presets will be retained in the system's memory. Power Saving Automatic Standby As a power-saving feature, the system automatically switches to standby 15 minutes after a USB connected device has reached the end of the last track and no control is operated. Adjusting volume and sound 1 Press VOLUME -/+ to decrease or increase the volume. Display shows the volume level VoL and a number 0-32. [. . . ] 20dBf Selectivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 dB Total harmonic distortion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1% Frequency response ­ FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 ­ 6000 Hz Signal-to-noise-ratio ­ FM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]