User manual PHILIPS AQ6681

[. . . ] To attach, position the shaped grip (found on the back of the belt clip) so that it fits into the belt clip hole. Mains adapter The voltage of the 3V adapter must match with the local mains voltage. [. . . ] Please inquire about local regulations on how to hand in your old set for recycling. Note: 9/10 kHz AM tuning step (not all versions) In North and South America the frequency step between adjacent AM band channels is 10kHz. in the rest of the world this step is 9 kHz. Usually the frequency step has been preset in the factory for your area. Press and hold down TUNING ­ or + briefly, releasing the button when the frequency on the display changes rapidly. ­ The tuning TUN LED indicator lights up when a station is detected and you will be able to hear the station. ­ In an area receiving strong radio signals, the tuning TUN LED indicator will remain lit up during the radio function, but you may still need to fine tune. Press TUNING ­ or + once to stop search tuning completely. If necessary, fine tune to your station by pressing TUNING ­ or + once or as often as required until the right frequency is found. Selecting and storing frequencies: presets You can store the frequencies of 10 radio stations in the memory, 5 on each wave band. A stored frequency is only erased from the memory by storing another frequency in its place. If a fault occurs, first check the points listed below before taking the set for repair. [. . . ] the production number is located in the battery compartment. This set complies with the radio interference requirements of the European Union 1. [. . . ]