User manual PHILIPS AQ6691

[. . . ] ­ When the batteries are running low, flashes in the display. if the radio is on , it will automatically switch off. [. . . ] SELECTING & STORING FREQUENCIES: PRESETS You can store the frequencies of up to 10 radio stations in the memory, 5 on each wave band. A stored frequency is only erased from the memory by storing another frequency in its pIace. 1 Select your wave band and tune to your desired station (See previous chapter on TUNING). 2 Press one of the preset numbers (1-5) for 2 seconds or more to store your station. ⭠PRESET appears in the display. 3 To listen to a preset station, select your wave band and then press the preset number of your desired station. erasing the PRESET Memory · Use the tip of the headphone plug or a ballpoint pen to press RESET found on the back of the cassette door. All previous preset stations are erased and the clock time will need to be re-entered. 2 Push the belt clip down 2 and turn 3 to LOCK as indicated on the set. Which affects the display and electronic functions of your set, the RESET button allows you to clear all data (e. Use the tip of the headphone plug or a ballpoint pen to press RESET found on the back of the cassette door. Memory protection The memory protection acts as a backup should there be a power failure or interruption. [. . . ] If you are unable to remedy a problem by following these hints, consult your dealer or service centre. WARNING: Under no circumstances should you try to repair the set yourself, as this will invalidate your guarantee. [. . . ]