User manual PHILIPS AUDIO CD RECORDER CDR600BK

[. . . ] xp CDR 600/17 English 20-03-2001 13:27 Pagina 1 Audio CD Recorder CDR-600 Toll Free Help Line Ligne d'assistance en service libre Linea de ayuda telefónica sin cargo 800-531-0039 xp CDR 600/17 English 20-03-2001 13:27 Pagina 2 Español _________________________62 This warning label is located on the rearside and inside this laser product. CAUTION: INVISIBLE LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM DANGER: INVISIBLE LASER RADIATION WHEN OPEN. AVATTAESSA JA SUOJALUKITUS OHITEJTAESSA OLET ALTTIINANAKYMATTOMAALLE LASERSATEILYLLE. ALA KATSO SATEESEEN. OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD OCH SPARREN AR URKOPPLAD. BETRAKTA EJ STRALEN or DANGER - Invisible laser radiation when open. [. . . ] Rotate the EASY JOG/ENTER key to decrease the record level until, on the Record/Play Level bar, all the blue segments are alight, but the red segments do not light continuously during the loudest passages. Press STOP 9 on the CD recorder and on the source. The adjusted recording level is stored in the memory of your recorder (also when powered off!). Note:The recording level can also be adjusted for digital or optical recordings after selecting the DIGITAL 1 or OPTICAL input. 3 4 5 6 xp CDR 600/17 English 20-03-2001 13:27 Pagina 20 Recording 1 Recording To start recording, press Play on the external source from which you want to record. The CD recorder automatically starts recording. If, however, you start the source during a track, recording will start at the beginning of the next track or after 2. 7 seconds of silence in analog recordings. Track numbers are automatically incremented. During an analog recording you can insert additional track numbers during recording by simply pressing TRACK INCR. The EASY JOG/ENTER key can be used to adjust the recording level. The recorder stops automatically in case of digital recording from a CD. With AUTO TRACK ON, the recorder pauses and waits for a new track for 1 minute before going to stop. Recordings from DAT, DCC or analog sources will only stop after 20 seconds of silence. To stop recording manually, press STOP 9 on the CD recorder. sync goes out and the display will show UPDATE for several seconds. Finalizing If you want to play the recorded CD(RW) on a normal CD player, you must first finalize the disc. Please note that you cannot add anymore tracks on a finalized CDR. 3 1 2 This feature enables you to record a single track from a CD, LP or cassette. Preparing Place an unfinalized recordable disc, absolutely free of scratches and dust particles in the CD recorder tray. Press SOURCE repeatedly to select the type of connection you made to your source of recording. Examples: - CD-player is connected with its digital out connector directly to the digital in connector of your CD-recorder: connection is DIGITAL I. - CD-player is connected with its analog out connectors directly to analog in connectors of your CD-recorder: connection is ANALOG - Turntable is connected with its analog out connectors to amplifier/receiver which is connected to the analog in connectors of your CD-recorder: connection is ANALOG DIGITAL I, OPTICAL I or ANALOG lights up and DIGITAL 1, OPTICAL 1 or ANALOG will appear on the display. With the recorder stopped, press RECORDING TYPE two times to to select REC TRACK for recording of a single track. d and sync start to flash and the display shows the selection. Recording To start recording, press Play on the external source from which you want to record. The CD recorder automatically starts recording. [. . . ] If you want to add a CD to the list of discs for which text is stored, you will have to erase a disc from this list or finalize another disc for which text is stored. MEMORY FULL/FINALIZE CD may also appear when unfinalizing a CDRW disc for which text was stored (see `Unfinalizing CDRW discs'). The same action(s) should be taken in order to obtain memory space. 1 2 Press STORE/MENU. Rotate the EASY JOG/ENTER key to select the AUTO TRACK submenu. Turn the EASY JOG/ENTER key to select Auto track OFF or ON. [. . . ]