User manual PHILIPS AW7110

[. . . ] For the safety of everyone in your household, please do not remove product covering. The `exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should not be placed on this apparatus. CAUTION: To prevent electric shock, fully insert the plug. [. . . ] p MENU · Access the iPod/iPhone or DAB menu. EN 11 English q TIMER/SLEEP · Set the alarm timer. · Set the sleep timer. 3 Connect Connect speakers Caution · For optimal sound, use the supplied speakers only. Connect power Caution · Risk of product damage!Make sure that the power supply voltage corresponds to the voltage printed on the back or the underside of the Micro Hi-Fi system. · Before connecting the AC power cord, make sure that you have completed all other connections. · Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual. 1 Connect the AC power cord to the power outlet. 1 Fully insert the plugs from the speakers into the speaker sockets on the back of the main unit. 12 EN 4 Get started Caution · Use the controls only as stated in this user manual. · Always follow the instructions in this chapter in sequence. Note · If you are not going to use the remote control for a long time, remove the batteries. English · Do not use old and new or different types of batteries in combination. · Batteries contain chemical substances, so they should be disposed of properly. If you contact Philips, you will be asked for the model and serial number of your apparatus. The model number and serial number are on the back of the apparatus. ___________________________ Set clock 1 In the standby mode, press and hold CLOCK/DISPLAY to activate the clock setting mode. » The 12 hour or 24 hour format is displayed. Press PROG repeatedly to select 12 hour or 24 hour format. » The hour digits are displayed and begin to blink. » All available stations are stored in the order of reception strength. » The first programmed radio station is broadcast automatically. Display RDS information Program radio stations manually You can program a maximum of 40 preset radio stations. 1 2 Tune to the desired RDS radio station on the FM waveband. Press INFO/RDS on the remote control repeatedly to switch through the following information (if available): · Station name · Program type (for example: News, Sport, etc. ) · Frequency · Stereo/Mono Mode · Current time · Date 1 2 3 4 5 18 Tune to a radio station. (See "Tune to a radio station" section. ) Press PROG to activate program mode. Press PRESET/ALBUM to allocate a number to this radio station. Repeat the above steps to program other stations. EN Display RDS information When the unit is on, the clock can be automatically set by synchronizing with the time signal broadcasts with the RDS signal. This only works if the RDS station is sending this time signal. When clock synchronizing is turned on, clock is synchronized with the time set by DAB or RDS, and manually set clock is overwritten. To turn on or off clock synchronizing: English 1 In DAB or FM mode, press and hold MENU on the main unit for around 2 seconds to switch it on or off. Note · Some RDS radio station may be transmitting a real time clock at a minute interval. The accuracy of the transmitted time depends on the transmitting RDS radio station. EN 19 9 Listen to Digital Audio Broadcasts (DAB) Digital Audio Broadcasting (DAB), is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. Listen to preset DAB stations 1 In DAB mode, press PRESET/ALBUM to select a preset number. [. . . ] No power · Ensure that the AC power cord of the unit is connected properly. · Ensure that there is power at the AC outlet. · As a power-saving feature, the system switches off automatically 15 minutes after track play reaches the end and no control is operated. No sound or poor sound · Adjust the volume. [. . . ]