User manual PHILIPS AW7224

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 3 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 3 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] TM After the system tunes to a station of sufficient reception, display shows its frequency. · To tune to a weak station, press ¡1 / 2 TM briefly and repeatedly until an optimal reception is found. To improve reception (FM): Extend and position the pigtail fully to obtain optimum reception. STORING AND USING PRESET STATIONS You can store up to 20 FM radio stations in the memory. 1 Tune to your desired station (see TUNING TO RADIO STATIONS). 2 Press PROG to activate the programming, and then press ALBUM/PRESET -/+ 1 / 2 to select a desired preset number. 4 Press ALBUM/PRESET -/+ 1 / 2 to listen to a preset station. AUTOSTORE: Automatic programming 1 Press and hold PROG for more than two seconds. TMAvailable radio stations will be automatically stored. USING THE ALARM GENERAL Two different alarm times can be set. This can be useful when you need to be woken up at a different time e. g. during the week and at the weekend, and you can set different wake-up modes: · Tuner mode. DOCK ADAPTORS Before plugging your player in the dock, snap the suitable dock adaptor into the dock to provide a snug fit for the player to be docked. Selecting the correct dock adaptor · For the iPod dock, 4 dock adaptors of different type, as indicated at the back of the adaptor, are included to fit the following iPod: iPod Touch 4GB/8GB, 20GB, 40GB, iPod Photo 20GB/30GB/40GB/60GB, iPod Video 30GB/60GB/80GB, iPod Classic 80GB/160GB, Mini and Nano. PLAYING iPod USING AW7224 1 Remove the top cover of dock. 2 Snap the compatible iPod into the dock connector. 3 Press SOURCE repeatedly to switch on the iPod mode. · Make sure that you have powered on Apple iPod before selecting iPod source. TM On the AW7224's display, "iPod" is displayed when iPod is connected. 4 The connected iPod player will play automatically. Notes: ­ By using the buttons ( 2;, ¡1, 2 TM and VOLUME ) on the AW7224, the following playback features are available: Play/Pause, selecting next/previous track, fast forwarding/rewinding and changing volume. ­ The buttons ( 2;, ¡1, 2 TM and VOLUME ) on the AW7224 can work only with playback of the audio contents stored on the docked player. ­ To navigate the iPod menu, you may use iPod MENU, 3 4 and OK buttons on the set. ­ When you press iPod MENU in iPod mode, 1 2 3 4 and OK buttons first perform the navigation function, and then restore the original functions. [. . . ] · If the device is not powered on, turn on the power manually, then re-connect it. PROGRAMING TRACK NUMBERS 1 Press 9 to stop the playback. 2 Press PROG to enter the programming mode. TM The current album number flashes. 3 Press ¡1 / 2TM to select a desired album number. [. . . ]