User manual PHILIPS AX1001

[. . . ] Any other product may damage the player. 1 Make sure that the adapter's voltage corresponds to the local voltage. 2 Connect the adapter to the 4. 5V DC socket of the player and to the wall socket. 4, 5V DC Note: Always disconnect the adapter when you are not using it. Headphones HE 545 · Connect the supplied headphones to the p/LINE OUT socket of the player. Note: p/LINE OUT can also be used for connecting the player to your HiFi system (with a signal lead) or to your car radio (with a cassette adapter or signal lead). In both cases, the volume of the player must be set to position 8. Use your head when using headphones Hearing safety: Do not play your headphones at a high volume. [. . . ] · Playback will stop if you open the CD lid. · While the CD is read, 1 -:- is displayed. Volume and bass Volume adjustment · Adjust the volume by using VOL E. Bass adjustment · Press BASS to switch the bass enhancement on or off y is shown if the bass enhancement is activated. MO DE PR OG RA M 11 English Playback information FEATURES Selecting a track and searching Selecting a track during playback · Briefly press or § once or several times to skip to the current, previous or next track. y Playback continues with the selected track, and the track's number is displayed. Selecting a track when playback is stopped 1 Briefly press or § once or several times to select the desired track. y Playback starts with the selected track. Searching for a passage during playback 1 Keep or § pressed to find a particular passage in a backward or forward direction. y Searching starts while playback continues at low volume. 2 Release the button when you reach the desired passage. y Playback continues from this position. MO DE PR OG English RA M Notes: ­ In SHUFFLE, SHUFFLE REPEAT ALL or REPEAT mode (see MODE chapter), or while playing a program, searching is only possible within the particular track. 12 FEATURES You can store up to 15 tracks to play in a program. A single track may be stored more than once in the program. 1 While playback is stopped, select a track with or §. y PROGRAM lights up; the track number programmed and P with the total number of stored tracks are displayed. 3 Select and store all desired tracks in this way. 4 Press 2; to start playback of your selected tracks. y PROGRAM is shown and playback starts. MO DE PR OG RA M · You can review the program by pressing PROGRAM for more than 2 seconds. y The display shows all the stored tracks in sequence. Notes: ­ If you press PROGRAM and there is no track selected, SELECt is displayed. ­ If you try to store more than 15 tracks, FULL is displayed. Clearing the program · While playback is stopped, press 9 to clear program. y CLEAr is displayed once, PROGRAM goes off, and the program is cleared. Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically. 13 English Programming track numbers FEATURES Selecting different playing possibilities ­ MODE It is possible to play tracks in random order, to repeat a single track or the entire CD. 1 Press MODE during playback as often as required in order to activate one of the following `modes'. The active mode is shown in the display. y SHUFFLE: All tracks of the CD are played in random order until all of them have been played once. y SHUFFLE REPEAT ALL: All tracks of the CD are played repeatedly in random order. [. . . ] · To clean the CD, wipe it in a straight line from the centre towards the edge using a soft, lint-free cloth. Never write on a CD or attach a sticker to it. · The lens may cloud over when the set is moved suddenly from cold to warm surroundings. Leave the CD-player in a warm environment until the moisture has evaporated. [. . . ]