User manual PHILIPS AX1100

[. . . ] Avoid dropping the unit as this may cause damage. We have done our best to make the packaging easily separable into two materials: cardboard and polyethylene. ⷠYour unit consists of materials which can be recycled if disassembled by a specialized company. Any other product may damage the player. [. . . ] Searching for a passage during playback 1 Keep or § pressed to find a particular passage in a backward or forward direction. YSearching is started and playback continues at low volume. After 2 seconds the search speed increases. 2 Release the button when you reach the desired passage. YNormal playback continues from this position. YThe current track number and the elapsed playing time are displayed. YThe total number of tracks and the total playing time of the CD are displayed. 6 Press 9 again to switch off the player. ⷠTo remove the CD, hold it by its edge and press the hub gently while lifting the CD. Notes: ­ During SHUFFLE, SHUFFLE REPEAT ALL, REPEAT or while playing a program, searching is only possible within the particular track. Note: If there is no activity, the unit will automatically switch off after a while to save energy. In that case, use FINALIZE on your CDrecorder to complete the recording. ⷠIf you want to play a CD-Rewritable (CD-RW), it takes 3­15 seconds for sound reproduction to start once you have pressed 2;. While the CD is being read, 1 -:- flashes in the display. PROGRAMMING TRACK NUMBERS You can select up to 15 tracks to play in a program. A single track may be played more than once in the program. 1 While playback is stopped, select a track with or §. YPROGRAM lights; the track number programmed and P, with the total number of stored tracks, are displayed. You can review the program by pressing PROGRAM for more than 2 seconds. Notes: ­ If you press PROGRAM and no track is selected, SELECt is displayed. ­ If you try to store more than 15 tracks, FULL is displayed. clearing the program · While playback is stopped, press 9 to clear program. [. . . ] The CD is badly scratched or dirty Replace or clean the CD CD is not or incorrectly inserted Insert a CD, label upwards The laser lens is steamed up Wait until the lens has cleared RESUME You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME­HOLD­OFF slider for these functions. YRESUME is shown and playback continues from where you have stopped last. Now, when a key is pressed, no action will be executed. [. . . ]