User manual PHILIPS AX1101-00C

[. . . ] Leave the CD player in a warm environment until the moisture has evaporated. · Active mobile phones in the vicinity of the CD player may cause malfunctions. · Avoid dropping the unit as this may cause damage. ENVIRONMENTAL INFORMATION · All redundant packing material has been omitted. [. . . ] Searching for a passage during playback 1 Keep or § pressed to find a particular passage in a backward or forward direction. ySearching is started and playback continues at low volume. After 2 seconds the search speed increases. 2 Release the button when you reach the desired passage. yNormal playback continues from this position. MO DE PR OG RA M 4 Press 2; to switch the player on and start CD playback. yThe current track number and the elapsed playing time are displayed. · You can pause playback by pressing 2;. yThe time where playback was paused will flash. · You can continue playback by pressing 2; again. yThe total number of tracks and the total playing time of the CD are displayed. 6 Press 9 again to switch off the player. · To remove the CD, hold it by its edge and press the hub gently while lifting the CD. Notes: ­ During SHUFFLE, SHUFFLE REPEAT ALL, REPEAT or while playing a program, searching is only possible within the particular track. Note: If there is no activity, the unit will automatically switch off after a while to save energy. 0 PLAYBACK INFORMATION · If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly, nF dISC is displayed. In that case, use FINALIZE on your CDrecorder to complete the recording. · If you want to play a CD-Rewritable (CD-RW), it takes 3­15 seconds for sound reproduction to start once you have pressed 2;. · Playback will stop if you open the CD lid. · While the CD is being read, 1 -:- flashes in the display. VOLUME AND BASS Volume adjustment Adjust the volume by using VOL E. Bass adjustment · Press BASS to switch the bass enhancement on or off y is shown if the bass enhancement is activated. MO DE PR OG RA M PROGRAMMING TRACK NUMBERS You can select up to 15 tracks to play in a program. A single track may be played more than once in the program. 1 While playback is stopped, select a track with or §. yPROGRAM lights; the track number programmed and P, with the total number of stored tracks, are displayed. 3 Select and store all desired tracks in this way. [. . . ] HOLD You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions. [. . . ]