User manual PHILIPS AZ1005

[. . . ] Open the battery compartment and insert six batteries, type R-20, UM-1 or D-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "-" symbols inside the compartment. Replace the compartment door, making sure the batteries are firmly and correctly in place. ­ If BATT LOW lights up, battery power is running low. ­ The BATT LOW indicator eventually goes out if the batteries are too weak. [. . . ] Reduce its length if the signal is too strong (very close to a transmitter). ­ For MW/AM/LW, the set is provided with a built-in aerial so the telescopic aerial is not needed. Direct the aerial by turning the whole set. To switch off, adjust the POWER slider to TAPE/OFF position with the keys on the tape deck released. Press PRESET 4 or 3 once or more to allocate a number from 1 to 30 to this station. ­ Display: PROGRAM disappears, the preset number and the frequency of the preset station are shown. Repeat the above four steps to store other stations. ­ You can erase a preset station by storing another frequency in its place. Insert a CD or CD-R(W) with the printed side facing up and close the CD door. tM Display: flashes as the CD player scans the contents of a CD. The total number of tracks and playing time are then shown. ⷠIf the CD player cannot read CDs correctly, use a commonly available cleaning CD to clean the lens before taking the set to repair. Other cleaning methods may destroy the lens. ⷠSudden changes in the surrounding temperature can cause condensation to cloud over on the lens of your CD player. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. ⷠAlways keep the CD compartment closed to avoid dust on the lens. ⷠTo take a CD out of its box, press the centre spindle while lifting the CD. Always pick up the CD by the edge and return the CD to its box after use to avoid scratching and dust. ⷠTo clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. ⷠNever write on a CD or attach any stickers to it. TM The display shows throughout tape operation, and the function indication lights up. [. . . ] Press PAUSE ; and clean the magnetic heads A and also the capstan B . Note: Cleaning of the heads can also be done by playing a cleaning cassette through once. We have done our utmost to make the packaging easy to separate into three materials: cardboard (box), expandable polystyrene (buffer), polyethylene (bags, protective foam). Your set consists of materials which can be recycled if disassembled by a specialized company. [. . . ]