User manual PHILIPS AZ101-00C

[. . . ] The mains lead is now connected and ready for use. To switch the set off completely, withdraw the power cord from the wall socket. Disconnect the mains lead from the wall socket to protect your set during heavy thunderstorms. Helpful hints : To avoid unnecessary energy consumption, always adjust the source selector to TAPE/POWER OFF after using the set. [. . . ] Helpful hints : When searching within a final track and you reach the end of the last track, the CD goes to stop mode. To review a program · In the stop position, press PROG repeatedly to see your stored track numbers. Erasing a program You can erase the contents of the memory by: ­ Pressing STOP 9 (twice during playback or once in the stop position) ­ Selecting TUNER or TAPE/POWER OFF sound source; ­ opening the CD door; · Cassette Recorder General information on recording Recording is permissible insofar as copyright or. other rights of third parties are not infringed. For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. The best recording level is set automatically. Altering the VOLUME will not affect the recording. To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape. CD synchro start recording 1 2 3 4 Select CD source. Insert a CD and if desired, program track numbers. Playing of the CD/ program starts automatically from the beginning. It is not necessary to start the CD player separately. To stop recording, press 9/. · · · 3 Programming track numbers You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. In the stop position, press PROG to activate programming. Press or § to select your desired track number. Display: PROG and your desired track number flash. (see 5) Press PROG to store the desired track number. Display: PROG and 00 flash for you to program the next track. (see 6) Repeat steps 2 to 3 to select and store all desired tracks in this way. Display shows --after 20 tracks are stored To play your program, press PLAY/PAUSE 2;. [. . . ] Adequate ventilation with a minimum gap of 15cm between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc. . No objects filled with liquids, such as vases, shall be placed on the apparatus. No naked flame sources, such as lighted candles, should be placed on the apparatus. [. . . ]