User manual PHILIPS AZ1024

[. . . ] Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires. Top/front panels (See 1) 1 VOLUME ­ adjusts volume level. 2 SHUFFLE ­ plays all tracks in random order 3 REPEAT ­ repeats a track/ CD program/entire CD. 4 2 ; ­ starts or pause CD playback § ­ selects the next/previous track ­ searches forwards/backwards (press and hold the button) within the current track CAUTION - Visible and invisible laser radiation. If the cover is open, do not look at the beam. [. . . ] Direct this antenna for best reception by turning the whole set. 9 # ALL Printed in China PDCC-ZC-0735 Az102_ 05_Eng 2007. 8. 28 11:41 Page 2 CD Player 3 Playing a CD · You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. 1 In the stop position, press PROG to activate programming. (See 5) Press or § to select your desired track number. Press PROG to store the desired track number. Display: PROG and 00 flash for you to program the next track. . Repeat steps 2 to 3 to select and store all desired tracks in this way. If you attempt to store more than 20 tracks, no track can be selected and the display shows --. 5 Helpful hints : 1 This CD player plays Audio Discs including CD-Recordables (CD-R) and CD-Rewritables (CD-RW). MP3, CD-ROM, CD-I, CDV, VCD, DVD or computer CDs are not possible for playback. CDs encoded with copyright protection technologies by some record companies may be unplayable by this product. 1 3 1 2 Open the CD door, and insert a CD with the printed side facing up, then press the CD door gently to close. Helpful hints: Display shows --, and later the total number of tracks. (See 3) When your searching reaches the end of the last track, the CD goes to stop mode. [. . . ] 1 In the stop position, press SHUFFLE to switch on shuffle play. 2 No naked flame sources, such as lighted candles, should be placed on the apparatus. · 6 ­ you open the CD door; X The mechanical parts of the set contain selflubricating bearings and must not be oiled or lubricated. ­ you select FM, MW or OFF sound source; ­ the CD has reached the end. Reviewing the program In the stop position, press PROG repeatedly to see your stored tracks. Erasing a program You can erase the contents of the memory by: ­ in the stop position, press PROG to enter program mode, and then press 9. ­ selecting FM, MW or OFF; ­ opening the CD door; ALL Helpful hints: ­ During the shuffle play, when REP function is selected, it will play the current shuffled track repeatedly, or when the REP ALL function is selected, it will repeat the shuffle play of the entire CD. · To clean the set, use a dry cloth. [. . . ]