Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PHILIPS AZ1055. We hope that this PHILIPS AZ1055 user guide will be useful to you.
Lastmanuals help download the user guide PHILIPS AZ1055.
You may also download the following manuals related to this product:
PHILIPS AZ1055 BROCHURE (301 ko)
Manual abstract: user guide PHILIPS AZ1055
Detailed instructions for use are in the User's Guide.
[. . . ] the type plate is located on the bottom of the set. 2 If the set is equipped with a VOLTAGE selector A, set this selector to the local mains voltage. To change over to battery supply, pull out the plug from the unit's AC MAINS socket. To disconnect the set from the mains completely, remove the mains plug from the wall socket. [. . . ] You can select a number of tracks and store these in the memory in the desired sequence. a maximum of 20 tracks can be stored in the memory. 1 When CD play is stopped, select the desired track with or §. 2 As soon as the number of the desired track is displayed, press CD MODE to store the track in the memory. P lights up briefly, then the number of the stored track is shown. 3 Select and store all desired tracks in this way. 4 You can review your settings by pressing and holding CD MODE for more than 1 second. TM The display shows all stored track numbers in sequence. If you try to store more than 20 tracks, the display shows F. TM no lights up briefly, PROGRAM disappears and your program is erased. Note: The program will also be erased if you: interrupt the power supply, open the CD compartment, or move the POWER slider. 3 Insert a recorded cassette with the open side upwards and close the cassette compartment. Recording is permissible insofar as copyright or other rights of third parties are not infringed upon. For recording on this set you should use a cassette of the type NORMAL (IEC type I). This deck is not suitable for recording on cassettes of the type CHROME (IEC type II) or METAL (IEC type IV). At the very beginning and end of the tape, no recording will take place in the 7 seconds during which the leader tape passes the recorder heads. Protecting tapes from accidental erasure Keep the cassette side to be protected in front of you and snap off the left tab. Now, recording on this side is no longer possible. [. . . ] Disconnect the set from power supply, reconnect after a few seconds. direct the antenna for optimum reception. Keep the radio away from electrical equipment. Clean heads, capstans, and pressure rollers. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PHILIPS AZ1055
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PHILIPS AZ1055 will begin.
PHILIPS AZ1055 BROCHURE (301 ko)
