User manual PHILIPS AZ1060

[. . . ] OPEN 9/ - stops the tape; - opens the cassette compartment SEARCH 5 / 6 - fast winds/rewinds the tape PLAY 1 - starts playback RECORD 0 - starts recording 8 BATT LOW - indicates when battery power is running low 9 OPEN· Repeats tracks or SHUFFLE, plays tracks in random order !Cassette door @ SEARCH / § Radio: - (down/up) tunes to radio stations; CD: - searches back and forward within a track; - skips to the beginning of a current track/ previous/ subsequent track # PLAY· PAUSE 2; starts or interrupts CD playback $ STOP 9 - stops CD playback or erase a CD programme % PROG Radio: programmes preset radio stations; CD: programmes tracks and reviews the programme ^ PRESET 3 , 4 (up, down) selects a tuner preset station & BAND - selects waveband BACK PANEL * Telescopic aerial - improves FM reception ( AC MAINS - inlet for mains lead ) Battery compartment for 6 x R-20, UM-1 or D-cells English Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Whenever convenient, use the AC mains supply if you want to conserve battery life. Make sure you remove the plug from the set and wall socket before inserting batteries. [. . . ] TM Display: Current track number and elapsed playing time of the track during CD playback. TM The display freezes and the elapsed playing time flashes when playback is interrupted. To switch off, adjust the POWER slider to TAPE/OFF position with the keys on the tape deck released. Note: CD play will also stop when: ­ the CD door is opened; ­ the CD has reached the end (unless you have selected REPEAT or REPEAT ALL); ­ you select another source: TAPE / TUNER. Press SEARCH or § once or repeatedly until the desired track number appears in the display. ⷠIf you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY· Finding a passage within a track TM The CD is played at high speed and low volume. When you recognize the passage you want, release SEARCH or §. ⭠Normal playback continues. Note: During a CD programme or if SHUFFLE/ REPEAT active, searching is only possible within a track. You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ programme are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme continuously in random order REPEAT ALL - repeats the entire CD/ programme REPEAT - plays the current track continuously 1. To select your play mode, press the MODE button before or during playback until the display shows the desired function. To return to normal playback, press the respective MODE button until the various SHUFFLE/ REPEAT modes are no longer displayed. ­ You can also press STOP 9 to cancel your play mode. If you like, store any track more than once. Use the SEARCH or § to select your desired track number. TM If you attempt to programme without first selecting a track number, is shown. TM is displayed if you attempt to programme more than 20 tracks. In the stop position, press and hold down PROG for a while until the display shows all your stored track numbers in sequence. Erasing a programme You can erase the programme by: ­ pressing STOP 9 once in the STOP position; ­ pressing STOP 9 twice during playback; ­ pressing the CD door open; ­ switching to another source: TAPE/TUNER. The lens of the CD player should never be touched! [. . . ] TROUBLESHOOTING WARNING: Do not open the set as there is a risk of electric shock. under no Circumstances should you try to repair the set yourself, as this will invalidate the guarantee. Insert (fresh) batteries correctly Severe radio hum or noise ­ Electrical interference: set too close to TV, VCR or computer · MW (AM) or LW: Direct the aerial by turning the whole set. Or indication No CD inserted Insert a CD CD badly scratched or dirty Replace/ clean CD, see Maintenance Laser lens steamed up, Wait until lens has cleared indication CD-R(W) is blank or the disc is not finalised Use a finalised CD-R(W) CD badly scratched or dirty Replace/ clean CD, see Maintenance English If a fault occurs, first check the points listed below before taking the set for repair. [. . . ]