User manual PHILIPS AZ1141

[. . . ] SHUFFLE/ REPEAT CD tracks or programme in random /repeated order @ STOP 9 - stops CD playback or erase a CD programme; activates/ deactivates display demo mode. # Cassette door $ Display - shows the status of the set % SEARCH / § Tuner: (down , up) tunes radio stations. CD: - searches back and forward within a track; - skips to the beginning of a current track/ previous/ later track ^ PROGRAM Tuner - programmes preset radio stations; CD - programmes tracks and reviews the programme BACK PANEL & p - 3. 5 mm stereo headphone jack * Telescopic antenna - improves FM reception ( BEAT CUT switch - eliminates possible whistle tones during MW/LW recordings ) AC MAINS - inlet for power cord ¡ Battery compartment - for six batteries, type R-14, UM-2 or C-cells English Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. [. . . ] Repeat the above four steps to store other stations. ­ You can overwrite a preset station by storing another frequency in its place. Insert a CD or CD-R(W) with the printed side facing up and close the CD door. tM Display: d1SC flashes as the CD player scans the contents of a CD. The total number of tracks and playing time are then shown. TM Display: Current track number and elapsed playing time of the track during CD playback. TM The display freezes and the elapsed playing time flashes when playback is paused. Note: CD play will also stop when: ­ the CD door is opened; ­ the CD has reached the end (unless you have selected REPEAT or REPEAT ALL); ­ you select another source: TAPE / TUNER. selecting a different track · Press SEARCH or § once or repeatedly until the desired track number appears in the display. ⷠIf you have selected a track number shortly after loading a CD or in the PAUSE position, you will need to press PLAY· pAUSE 2; to start playback. press and hold down on SEARCH or §. TM The CD is played at high speed and low volume. When you recognize the passage you want, release SEARCH or §. ⭠Normal playback continues. Note: During a CD programme or if SHUFFLE/ REPEAT active, searching is only possible within a track. You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAM. SHUFFLE - tracks of the entire CD/ programme are played in random order SHUFFLE and REPEAT ALL - to repeat the entire CD/ programme continuously in random order REPEAT ALL - to repeat the entire CD/ programme REPEAT - to play the current track continuously 1. To select your play mode, press the CD MODE key before or during playback until the display shows the desired function. To return to normal playback, press the CD MODE key until the various SHUFFLE / REPEAT modes are no longer displayed. ­ You can also press STOP 9 to cancel your play mode. If you like, store any track more than once. [. . . ] Press PLAY 1 and clean the rubber pressure rollers C. Press PAUSE ; and clean the magnetic heads A and also the capstan B . Note: Cleaning of the heads can also be done by playing a cleaning cassette through once. TROUBLESHOOTING WARNING: Do not open the set as there is a risk of electric shock. [. . . ]