User manual PHILIPS AZ1220/11T

[. . . ] 3 Cassette recorder keys: ; ­ pauses playback or recording 9/ ­ stops playback or recording. 5 or 6 ­ fast winds/rewinds the tape 1 ­ starts playback 0 ­ starts recording 4 2; - starts or pauses CD playback. 5 SEARCH § ­ CD: skips or searches a passage/track backward or forward. 6 9 ­ stops CD playback; ­ erases a program; 7 Cassette door 8 SHUFFLE ­ plays all CD tracks in random order. [. . . ] When you recognize the passage you want release or §. Normal playback resumes. 4 · Helpful hints: ­ When your searching reaches the end of the last track, the CD playback stops. Helpful hints: The CD playback will also stop when: ­ you open the CD compartment; ­ you select RADIO or TAPE sound source; ­ the CD has reached the end of the playback. CD Player Programming tracks You may store up to 20 tracks in the desired sequence. If you like, store any track more than once. 1 In the STOP position, press PROG to start programming. Display shows 01 indicating the start of the program. (See 4) Press or § to select your desired track number. Display shows 02 (up to 20 in sequence), indicating the next program location available. Repeat steps 2 to 3 to select and store all desired tracks. To review your program In the stop position, press PROG The display shows all the stored tracks in sequence. Helpful hints: ­ If you try to store more than 20 tracks, no track can be selected and the display will show all your stored tracks in sequence. ­ If you press PROG and there is no track selected, 01 is displayed. To erase a program You can erase a program by: ­ pressing 9 (twice during playback or once in the stop position); ­ selecting RADIO or TAPE sound source; ­ opening the CD door; Display: PROG disappears. Cassette Recorder Selecting different playing modes During playback, you can select the playing modes by pressing REPEAT and SHUFFLE once or more. REPEAT Tape operation/recording Playing a tape 1 2 3 Adjust the source selector to TAPE/OFF. Press 9/ to open the cassette holder, insert a cassette and close the deck. To stop playback, Press 9/. General information on recording · Recording is permissible insofar as copyright or. other rights of third parties are not infringed. For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. The best recording level is set automatically. Altering the VOLUME and DBB controls will not affect the recording. To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape. CD synchro start recording · (REPEAT flashes) ­ plays the current track continuously. (See 5) REPEAT ­ plays the entire CD/program continuously. [. . . ] If you are unable to remedy a problem by following these hints, consult your dealer or service centre. Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. [. . . ]